Maryland Cherokee Club
CF Veteran
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Feb 2012
Posts: 2,716
Likes: 2
From: Bowie, MD
Year: 1999
Model: Cherokee
Engine: 4.0L
Trimmed the fenders, Raptor lined the bottom protion and the lip around the wheel wells and put 33's on the 2 door today. Raptor lined the rock sliders and Russo's new front clip too
Senior Member
Joined: Dec 2010
Posts: 903
Likes: 1
From: Linthicum, Md
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
Thanks I didnt think of that.
Im pretty sure, I havent gotten to that stage of modifying quite yet..
Quad is too expensive and its hard to find part outs with that piece in decent condition. But I am looking, was hoping someone on here knew someone who knew someone who was parting out and wasnt going to try to butt rape me on the price.. Since we're all jeepers here
Im pretty sure, I havent gotten to that stage of modifying quite yet..
Quad is too expensive and its hard to find part outs with that piece in decent condition. But I am looking, was hoping someone on here knew someone who knew someone who was parting out and wasnt going to try to butt rape me on the price.. Since we're all jeepers here
Senior Member
Joined: Apr 2012
Posts: 713
Likes: 0
From: MARYLAND
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Thanks I didnt think of that.
Im pretty sure, I havent gotten to that stage of modifying quite yet..
Quad is too expensive and its hard to find part outs with that piece in decent condition. But I am looking, was hoping someone on here knew someone who knew someone who was parting out and wasnt going to try to butt rape me on the price.. Since we're all jeepers here
Im pretty sure, I havent gotten to that stage of modifying quite yet..
Quad is too expensive and its hard to find part outs with that piece in decent condition. But I am looking, was hoping someone on here knew someone who knew someone who was parting out and wasnt going to try to butt rape me on the price.. Since we're all jeepers here
Senior Member
Joined: Apr 2012
Posts: 713
Likes: 0
From: MARYLAND
Year: 1999
Model: Cherokee
Engine: 4.0L I6
, my Army computer doesn't like CF pics... will check out at the MWR...
CF Veteran
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Ok, so update. I removed both front wheels. I re-compressed both calipers with a clamp. Cleaned and regreased both slide rails. I wanted to determine if it was the calipers or booster. Once i finished, i started her up to go for a test drive. The brake pedal went straight to the floor. I found a puddle of brake fluid on the ground and under the reservoir. I had my wife pump the pedal and i cant find a source of leak. So i definetly have air in the lines now. I just gotta find where the leak is.
CF Veteran
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Ok, so update. I removed both front wheels. I re-compressed both calipers with a clamp. Cleaned and regreased both slide rails. I wanted to determine if it was the calipers or booster. Once i finished, i started her up to go for a test drive. The brake pedal went straight to the floor. I found a puddle of brake fluid on the ground and under the reservoir. I had my wife pump the pedal and i cant find a source of leak. So i definetly have air in the lines now. I just gotta find where the leak is.
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
geez, friend of mine backed into a pole with his pathfinder (newer one), put a huge dent in the bumper and it cost over a grand to fix. i backed into the same pole (white XJ) even faster than he did, and there was a tiny scratch. i looked at him and smiled.
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
went to the mall to get a haircut today. saw a JKU, and a newer Grand Cherokee. both had mud tires on them, and shiny coat of paints. I decided I'd park next to them. When I came out, both owners were at there car getting in. when i unlocked my car and got in, both people (they knew eachother/were friends) looked at me and asked why my car was dirty. My reply was because I drive a real jeep, and drove away. True Story.
CF Veteran
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
went to the mall to get a haircut today. saw a JKU, and a newer Grand Cherokee. both had mud tires on them, and shiny coat of paints. I decided I'd park next to them. When I came out, both owners were at there car getting in. when i unlocked my car and got in, both people (they knew eachother/were friends) looked at me and asked why my car was dirty. My reply was because I drive a real jeep, and drove away. True Story.