Jeep Cherokee Forum

North Atlantic Maine, New Hampshire, New York, Vermont, Massachusetts, Rhode Island, Connecticut, New Jersey, Delaware, Pennsylvania, Maryland, Washington DC

Maryland Cherokee Club

   
Old Aug 7, 2012 | 07:44 PM
Share
  #40636  
Garrettfab's Avatar
Garrettfab
Member
 
Joined: Apr 2012
Posts: 185
Likes: 0
Model: Cherokee
Default
Originally Posted by gone4x4
what are you lookin to get into, what do you find yourself comfortable, to start outta the gate with?
I would use it mainly for jeep parts. There are a few local weld shops and I dont think any of them have a plasma table. I would probably try to get some work from them. I've been looking at 4x4 tables.
Reply
0
Old Aug 7, 2012 | 07:48 PM
Share
  #40637  
nowhres's Avatar
nowhres
CF Veteran
 
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Default
Originally Posted by XJnewbiegirl
Hey does anyone have or know where I can get the bolt that connects the trac bar to the body? (if that makes sence)


Just got done replacing the power steering and it still whines some

I have one
Reply
0
Old Aug 7, 2012 | 07:50 PM
Share
  #40638  
brian0128's Avatar
brian0128
CF Veteran
 
Joined: Dec 2011
Posts: 1,140
Likes: 0
From: Near the airport by the water
Year: 1999
Model: Cherokee
Engine: 4.0
Default
Anyone know where to get timken hubs locally? And maybe some Spicer 760 U-Joints?
Last edited by brian0128; Aug 7, 2012 at 07:56 PM.
Reply
0
Old Aug 7, 2012 | 07:51 PM
Share
  #40639  
nowhres's Avatar
nowhres
CF Veteran
 
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Default
Originally Posted by Garrettfab
I might lease one for a year and see how I do.
If you do, I will be your new best friend, lol
Reply
0
Old Aug 7, 2012 | 07:52 PM
Share
  #40640  
nowhres's Avatar
nowhres
CF Veteran
 
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Default
Originally Posted by brian0128
Anyone know where to get timken hubs locally?
nowheres around here
Reply
0
Old Aug 7, 2012 | 07:58 PM
Share
  #40641  
brian0128's Avatar
brian0128
CF Veteran
 
Joined: Dec 2011
Posts: 1,140
Likes: 0
From: Near the airport by the water
Year: 1999
Model: Cherokee
Engine: 4.0
Default
Originally Posted by nowhres
nowheres around here
Damn. What's the next best thing. I replaced them with Timken2 years ago but I'm going to do my ball joints this weekend and want to have some on hand in case I need them.
Reply
0
Old Aug 7, 2012 | 07:58 PM
Share
  #40642  
nowhres's Avatar
nowhres
CF Veteran
 
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Default
Originally Posted by NewKindOfClown
Check Comanches in JYs. I had one minus the shifter (mine's column shift), and they come off very easily.

Sweet, will keep an eye out for some MJ's
Reply
0
Old Aug 7, 2012 | 08:00 PM
Share
  #40643  
nowhres's Avatar
nowhres
CF Veteran
 
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Default
Originally Posted by brian0128
Damn. What's the next best thing. I replaced them with Timken2 years ago but I'm going to do my ball joints this weekend and want to have some on hand in case I need them.

Your best bet locally would be whatever Advanced/Autozone/Pep Boys carry

http://shop.advanceautoparts.com/web...hedFrom=header
Last edited by nowhres; Aug 7, 2012 at 08:03 PM.
Reply
0
Old Aug 7, 2012 | 08:02 PM
Share
  #40644  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
Originally Posted by nowhres
Sweet, will keep an eye out for some MJ's
If you find any with good taillights (no deep scratches, chips, or breaks), I'll buy them from you for $50/set. I'm stockpiling.
Reply
0
Old Aug 7, 2012 | 08:06 PM
Share
  #40645  
nowhres's Avatar
nowhres
CF Veteran
 
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Default
Originally Posted by NewKindOfClown
If you find any with good taillights (no deep scratches, chips, or breaks), I'll buy them from you for $50/set. I'm stockpiling.

Good plan
Reply
0
Old Aug 7, 2012 | 08:08 PM
Share
  #40646  
brian0128's Avatar
brian0128
CF Veteran
 
Joined: Dec 2011
Posts: 1,140
Likes: 0
From: Near the airport by the water
Year: 1999
Model: Cherokee
Engine: 4.0
Default
Anyone want to help me do ball joints over at Fort Meade on Saturday? Left side are bad so I'll be doing ball joints, front U-Joints, and maybe hubs.
Last edited by brian0128; Aug 7, 2012 at 08:16 PM.
Reply
0
Old Aug 7, 2012 | 08:14 PM
Share
  #40647  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
And speaking of which...does anyone have the means to build custom taillight housings? Nothing fancy; I'd be happy with thin gauge metal. These things are difficult to find, and even harder to find cheap.
Reply
0
Old Aug 7, 2012 | 08:24 PM
Share
  #40648  
a_shirey's Avatar
a_shirey
CF Veteran
 
Joined: Jan 2012
Posts: 8,272
Likes: 1
From: Baltimore, MD
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
Default
Originally Posted by mikefrost

We'll be back at it tomorrow if anyone wants to come help drink beer
what time?
Reply
0
Old Aug 7, 2012 | 08:24 PM
Share
  #40649  
Garrettfab's Avatar
Garrettfab
Member
 
Joined: Apr 2012
Posts: 185
Likes: 0
Model: Cherokee
Default
Originally Posted by NewKindOfClown
And speaking of which...does anyone have the means to build custom taillight housings? Nothing fancy; I'd be happy with thin gauge metal. These things are difficult to find, and even harder to find cheap.
Like for the circular led lights?
Reply
0
Old Aug 7, 2012 | 08:28 PM
Share
  #40650  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
Originally Posted by Garrettfab
Like for the circular led lights?
I like the rectangular look, but I'd switch to LED lighting if someone with more electrical knowledge than me wanted to help out. Remember, the MJ has different lights and a very small aftermarket.
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 03:22 PM.