Maryland Cherokee Club
CF Veteran
Joined: Feb 2012
Posts: 2,961
Likes: 0
From: Sykesville, Md
Year: 2000
Model: Cherokee
Engine: 4.0
Since when does HomeDepot not carry hardly any metric hardware? My buddy left a brand new set of locking lugs at my shop so I am going to use them for my spare and my jack. They are tapped 12-1.5mm and depot didnt have any fine thread metric lol and the associates there are as useful as **** flavored lollypops so I gotta run to Robnet today to pick some up.
CF Veteran
Joined: Dec 2011
Posts: 4,006
Likes: 1
From: Pasadena, MD
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
Im only awake cause i dont feel good and just had a pretty good argument about the uselessness of personal checks when it comes to same day cash without having the money to back said check.
CF Veteran
Joined: Nov 2010
Posts: 5,151
Likes: 0
From: glen burnie md
Year: 2000
Model: Cherokee
--nice, i werk at a so-called stealership--and its been my experience-(31 years stealing) that aftermarket crap doesnt work or last as long as stealership factory stuff, especially when it comes to drivability stuff. case in point! the brand fu*kin new,aftermarket heater core, just installed last friday, is leaking, i replaced while the dash was out for the evap core, 
CF Veteran
Joined: Feb 2012
Posts: 2,961
Likes: 0
From: Sykesville, Md
Year: 2000
Model: Cherokee
Engine: 4.0
--nice, i werk at a so-called stealership--and its been my experience-(31 years stealing) that aftermarket crap doesnt work or last as long as stealership factory stuff, especially when it comes to drivability stuff. case in point! the brand fu*kin new,aftermarket heater core, just installed last friday, is leaking, i replaced while the dash was out for the evap core,
Senior Member
Joined: Jan 2012
Posts: 599
Likes: 2
From: Baltimore
Year: 96'
Model: Cherokee
Engine: 4.0L
yeah that too.
CF Veteran
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Good morning everyone. Happy hump day. 
Thanks Jon, yes the event is being held by F&S racing on private property in Hagerstown. They have a few trails, a nice mud pit and a rock garden. It was a blast last year and I hope more of us show up this year. It's $15 per driver and $10 per spectator. Kids under 12 are free. The drivers meeting starts at 9:30 and wheeling starts at 10. I believe I read food will be available for purchase. I'm going to pack lunch for me and the kids. We are going to meet in Frederick at the homedepot on rt. 40w. Then we will hang out for a few and do a quick m&g, then we will convoy to Jimmy's house in Hagerstown, as this will be a great place to limp back to if repairs are neccessary. I would bring cash. It's on someone's property and the only atm is a few miles away at the gas station.
Thanks Jon, yes the event is being held by F&S racing on private property in Hagerstown. They have a few trails, a nice mud pit and a rock garden. It was a blast last year and I hope more of us show up this year. It's $15 per driver and $10 per spectator. Kids under 12 are free. The drivers meeting starts at 9:30 and wheeling starts at 10. I believe I read food will be available for purchase. I'm going to pack lunch for me and the kids. We are going to meet in Frederick at the homedepot on rt. 40w. Then we will hang out for a few and do a quick m&g, then we will convoy to Jimmy's house in Hagerstown, as this will be a great place to limp back to if repairs are neccessary. I would bring cash. It's on someone's property and the only atm is a few miles away at the gas station.
Senior Member
Joined: Jan 2012
Posts: 599
Likes: 2
From: Baltimore
Year: 96'
Model: Cherokee
Engine: 4.0L
Good morning everyone. Happy hump day.
Thanks Jon, yes the event is being held by F&S racing on private property in Hagerstown. They have a few trails, a nice mud pit and a rock garden. It was a blast last year and I hope more of us show up this year. It's $15 per driver and $10 per spectator. Kids under 12 are free. The drivers meeting starts at 9:30 and wheeling starts at 10. I believe I read food will be available for purchase. I'm going to pack lunch for me and the kids. We are going to meet in Frederick at the homedepot on rt. 40w. Then we will hang out for a few and do a quick m&g, then we will convoy to Jimmy's house in Hagerstown, as this will be a great place to limp back to if repairs are neccessary. I would bring cash. It's on someone's property and the only atm is a few miles away at the gas station.
Thanks Jon, yes the event is being held by F&S racing on private property in Hagerstown. They have a few trails, a nice mud pit and a rock garden. It was a blast last year and I hope more of us show up this year. It's $15 per driver and $10 per spectator. Kids under 12 are free. The drivers meeting starts at 9:30 and wheeling starts at 10. I believe I read food will be available for purchase. I'm going to pack lunch for me and the kids. We are going to meet in Frederick at the homedepot on rt. 40w. Then we will hang out for a few and do a quick m&g, then we will convoy to Jimmy's house in Hagerstown, as this will be a great place to limp back to if repairs are neccessary. I would bring cash. It's on someone's property and the only atm is a few miles away at the gas station.
CF Veteran
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
CF Veteran
Joined: Nov 2010
Posts: 5,151
Likes: 0
From: glen burnie md
Year: 2000
Model: Cherokee
. My sister has a '98 ZJ and one of the rear regulators went up. Mopar wanted $400 for the regulator without a motor. I found them online for $160 with a motor. They are both Dorman products, why so much from the dealership? The parts guy *no offense* could never give a viable answer.
CF Veteran
Joined: Dec 2011
Posts: 4,006
Likes: 1
From: Pasadena, MD
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
CF Veteran
Joined: Feb 2012
Posts: 2,961
Likes: 0
From: Sykesville, Md
Year: 2000
Model: Cherokee
Engine: 4.0
Is yours the wire type or is it a scissor type? scissor type prolly just needs a good lube. The ones in hers are the wire type so there isnt much you can do but try and get some lithium down the wires.
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
type the search item, say "cherokee", but add a "-word" for anything you don't want to include in the results.
So you would type in "cherokee -grand" for your search
There are a TON of search modifiers you can use in google and other search engines - using them can severely cut down on the time it takes to find something. 90% of the questions i answer came just from searching google with the correct modifiers
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
Since when does HomeDepot not carry hardly any metric hardware? My buddy left a brand new set of locking lugs at my shop so I am going to use them for my spare and my jack. They are tapped 12-1.5mm and depot didnt have any fine thread metric lol and the associates there are as useful as **** flavored lollypops so I gotta run to Robnet today to pick some up.
