Maryland Cherokee Club
Senior Member
Joined: Dec 2010
Posts: 903
Likes: 1
From: Linthicum, Md
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
Originally Posted by Pudgy Fingers
What's the advantage of BPE's? Countrythang pointed out that I can use my rear sway bar brackets to do this. The write up I saw didn't say much other than it allows you to use bigger shocks. If I do this do you think I need PB blaster for the rear shock bolts? They are brand new, installed in October. Last question, anyone have a vice?
No to pb blaster, but it won't hurt it any..
Ive got a vice & a press at the shop lol
Originally Posted by NewKindOfClown
Also Flame Red. I'm whoring this pic as much as possible 
Would look better with a lift ;p
CF Veteran
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
..... Talked with Ken this morning and reminded him of your resume.... I have to go in Monday morning to take care of some business and will reminded him again....
Trust me, I want you in there, I don't want to have to pick up the slack
Senior Member
Joined: Dec 2010
Posts: 903
Likes: 1
From: Linthicum, Md
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
Cause they haven't called you yet ..... Talked with Ken this morning and reminded him of your resume....
I have to go in Monday morning to take care of some business and will reminded him again....
Trust me, I want you in there, I don't want to have to pick up the slack
..... Talked with Ken this morning and reminded him of your resume.... I have to go in Monday morning to take care of some business and will reminded him again....
Trust me, I want you in there, I don't want to have to pick up the slack
Im working 2 jobs now..
ahh, i get it, so you want me in there to pick up "your slack" ?
Yeah I know.
But if you didnt say anything I wouldnt have thought of it and then I wouldnt have said anything...
So, you were kinda asking for it..
Senior Member
Joined: Dec 2010
Posts: 903
Likes: 1
From: Linthicum, Md
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
So, I was poking and prodding around Google & some other Jeep websites I like to frequent and came across this:
http://www.myjeepxj.com/useful-infor...aft-infomation
Its a listing of Jeep Cherokee Front Drive Shaft information.
Everything from years to lengths to part numbers.
Figured it would be worth posting for those of you planning on doing some longer lifts in the future or some that just might have a need for some new ds's.
The website itself is just a guy who likes documenting his jeep's progress and sharing what he has found from trial with the world.
Some good reads in there for upgrades, replacements/repairs and other misc stuff..
http://www.myjeepxj.com/useful-infor...aft-infomation
Its a listing of Jeep Cherokee Front Drive Shaft information.
Everything from years to lengths to part numbers.
Figured it would be worth posting for those of you planning on doing some longer lifts in the future or some that just might have a need for some new ds's.
The website itself is just a guy who likes documenting his jeep's progress and sharing what he has found from trial with the world.
Some good reads in there for upgrades, replacements/repairs and other misc stuff..
CF Veteran
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
CF Veteran
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Picking up Josh's (Anya) Jeep Tuesday and holding it for him for 2 months, hoping it will buy him enough time to get back on his feet. Is there anyone near the Annapolis area that can get him to the Glen Burnie Light rail station that day??? I will have enough on my hands gassing up 2 vehicles and getting everything rolling on my end. If he is not there I cannot nor will not pick up the Jeep due to all of the issues surrounding where it is at now....
Any help would be appreciated...
Any help would be appreciated...
Senior Member
Joined: Apr 2011
Posts: 513
Likes: 0
From: Calvert County MD
Year: 1984
Model: Cherokee
Engine: 2.5 L 4cyc
Well I can do it as long as its no too early gotta take my mom to work at 8 or if it early I think I can do it. But I also need to know where I going.
CF Veteran
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
He can only get on the internet at the library, so I won't be able to pin down a time and meeting place until tomorrow
CF Veteran
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0