Maryland Cherokee Club
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Originally Posted by my89xj
Ok so my Cherokee is a limited so it has Chrome everything, ask Tim its true. So I wanted to put Chrome diamond plate on the side would that look dumb with a flat black front and rear bumper and roof rack? The rack is on but the bumpers will be in the progress
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Senior Member
Joined: Mar 2011
Posts: 590
Likes: 0
From: Sykesville, MD
Year: 1990
Model: Cherokee
Engine: 4.0 L
Welcome back my friend.
CF Veteran
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by xjknut11
Love this movie, and this part. Classic!
Welcome back my friend.
Check these out, cheap and easy to do...considering the material and look. http://www.quadratec.com/products/72538_40X_PG.htm
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Originally Posted by xjknut11
Check these out, cheap and easy to do...considering the material and look. http://www.quadratec.com/products/72538_40X_PG.htm
In my opinion, they are just creators of rust
CF Veteran
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by nowhres
In my opinion, they are just creators of rust
Senior Member
Joined: Mar 2011
Posts: 590
Likes: 0
From: Sykesville, MD
Year: 1990
Model: Cherokee
Engine: 4.0 L
Scott, this is true unless you know how to treat them before install... Your best bet 89, is to use Eastwood's extreme diamond clear coat to prevent rust.
Senior Member
Joined: Mar 2011
Posts: 590
Likes: 0
From: Sykesville, MD
Year: 1990
Model: Cherokee
Engine: 4.0 L
ps- why the fuqq are y'all still up?!?
I gotta get up at 6 and head down to Burtonsville to do some labor work for a company guy considering I'm not working right now...What're your excuses?? (Ps- I've been out enjoying the night life which is why I'm still up)
I gotta get up at 6 and head down to Burtonsville to do some labor work for a company guy considering I'm not working right now...What're your excuses?? (Ps- I've been out enjoying the night life which is why I'm still up)
speaking of axle seals can anyone on here help me do them? Its the front driver side seals.
Senior Member
Joined: Mar 2011
Posts: 590
Likes: 0
From: Sykesville, MD
Year: 1990
Model: Cherokee
Engine: 4.0 L
I COULD help you, but unfortunately I work the side job tomorrow. FYI you might want to rent a seal puller tool from advanced or somewhere makes it so much easier. If not, use a knife as I have. but it's gotta be a big boy knife.
CF Veteran
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by xjknut11
I COULD help you, but unfortunately I work the side job tomorrow. FYI you might want to rent a seal puller tool from advanced or somewhere makes it so much easier. If not, use a knife as I have. but it's gotta be a big boy knife.
