North Atlantic Maine, New Hampshire, New York, Vermont, Massachusetts, Rhode Island, Connecticut, New Jersey, Delaware, Pennsylvania, Maryland, Washington DC

Maryland Cherokee Club

Thread Tools
 
Search this Thread
 
Old May 25, 2012 | 10:41 AM
  #28891  
jimmy21669's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Originally Posted by LittleBuddy
I want something not so....tall..but that thing is nice. like the black

You can get retractable side steps....
Reply
Old May 25, 2012 | 10:42 AM
  #28892  
Pudgy Fingers's Avatar
CF Veteran
 
Joined: Aug 2011
Posts: 4,323
Likes: 0
From: New Market
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Default

Originally Posted by mickey_00xj
Alright Jon, swapped amps to my buddies kicker. No more buzzing and thumping, but his amp is single channel and made for a sub so the only sound I get out of the speakers is the low end of everything. Oh well, at least I know it's not my wiring or speakers. Pulled my amp apart last night and found a few spots where the terminal lines on the card were touching each other. I'm hoping that was the problem as I didn't see anything else wrong with it. We'll see today when I get home from work.
Good deal. His amp probably has a built in crossover set to LP so you get only bass. If its easily changed set it to HP to listen but if a buzz and thump were there before it would be heard no matter what so it's safe to assume that your amp is damaged some. Good luck.
Reply
Old May 25, 2012 | 10:43 AM
  #28893  
Pudgy Fingers's Avatar
CF Veteran
 
Joined: Aug 2011
Posts: 4,323
Likes: 0
From: New Market
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Default

Originally Posted by jimmy21669
More like this though....
Check out those leaf springs. Ridicutarded.
Reply
Old May 25, 2012 | 10:44 AM
  #28894  
LittleBuddy's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 2,574
Likes: 0
From: Laurel, MD
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by jimmy21669
You can get retractable side steps....
was kicking around the idea for the JK, but they're $1000+. And I'd have to run a switch on the dash. Doors come off in the summer. And I'd lose my rails.
Reply
Old May 25, 2012 | 10:45 AM
  #28895  
jimmy21669's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Saw this picture and HAD to lol....felt the need to share...

Name:  3WvNS.jpg
Views: 15
Size:  68.1 KB
Reply
Old May 25, 2012 | 10:46 AM
  #28896  
jimmy21669's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Maryland Cherokee Club-dnz7w.jpg
Reply
Old May 25, 2012 | 10:47 AM
  #28897  
LittleBuddy's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 2,574
Likes: 0
From: Laurel, MD
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by Pudgy Fingers
Check out those leaf springs. Ridicutarded.
JEALOUS!!!
Reply
Old May 25, 2012 | 10:55 AM
  #28898  
jimmy21669's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Pudgy Fingers
Check out those leaf springs. Ridicutarded.

I actually like that it is lifted properly....
Reply
Old May 25, 2012 | 11:03 AM
  #28899  
NewKindOfClown's Avatar
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default

Originally Posted by jimmy21669
This whole thing is f'ed up. I know I can get Mava's Jeep out of there....I know I can get it somewhere to get worked on.

What I have not figured out...how in the heck to get the engine out of Tim's on site. Seems a rather uncomfortable situation and would involve getting an engine hoist, and people/tools out there, and I don't even know how Tim's sits right now as far as access. Not to mention, potentially trespassing since we do not have permission to be there...Mike does.

It's a logistical nightmare and I am not sure it will get done at all...not to mention, a lack of volunteers to pull that engine out of Tim's.

Only reason I am involved is I feel bad for what has happened to Mava....she gave a month. I know she was getting an unusual deal to get this done, but once you count on someone, it makes you stop looking for alternatives, and at this point she is kinda screwed.
I offered the engine, but I don't have time to help. Between work, finishing my move, and trying to get my own Jeep fixed, I just can't. Hope someone steps up, though.
Originally Posted by MASCOTT
I just spoke with Mr Brewer,where xj's are being stored and he is going to let him know to contact me tonight. he works with him on night shift. Brewer did mention that he has been at work. I told him if someone showed up and was doing something to XJ's not to be alarmed. I think he should be notified before anyone just shows up at his place. I have his name, addy, and phone, so that's more than we had at first.
I've had name, addy, and phone number for a couple months, but I didn't wanna throw it around since he's just a buddy of Mike's. Everyone, please only bother him if you have to, and keep the number of contact personnel to a minimum. He's being extremely generous to strangers.
Originally Posted by LittleBuddy
would really like to have one of these. Maybe start looking for one next summer to tinker with.
This guy is in Frederick. I see him a couple times a month, and last time I looked, it was for sale.
Maryland Cherokee Club-20111026.jpg
Reply
Old May 25, 2012 | 11:09 AM
  #28900  
jimmy21669's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Originally Posted by NewKindOfClown
This guy is in Frederick. I see him a couple times a month, and last time I looked, it was for sale.
Attachment 119623

Oooohhh...do try and find out more...
Reply
Old May 25, 2012 | 11:12 AM
  #28901  
jimmy21669's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Name:  Tlbgt.jpg
Views: 17
Size:  61.6 KB
Reply
Old May 25, 2012 | 11:13 AM
  #28902  
NewKindOfClown's Avatar
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default

Originally Posted by jimmy21669

Oooohhh...do try and find out more...
All the pics I have of it. If I see him again, I'll get info.
Attached Thumbnails Maryland Cherokee Club-forumrunner_20120525_121155.jpg   Maryland Cherokee Club-forumrunner_20120525_121210.jpg   Maryland Cherokee Club-forumrunner_20120525_121223.jpg   Maryland Cherokee Club-forumrunner_20120525_121236.jpg  
Reply
Old May 25, 2012 | 11:17 AM
  #28903  
LittleBuddy's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 2,574
Likes: 0
From: Laurel, MD
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by jimmy21669
Oooohhh...do try and find out more...
so we can stare and drool?!
Reply
Old May 25, 2012 | 11:20 AM
  #28904  
LittleBuddy's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 2,574
Likes: 0
From: Laurel, MD
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

damn that's nice. what are parts availability like on those? Here I come Google!
Reply
Old May 25, 2012 | 11:21 AM
  #28905  
jimmy21669's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Name:  aPKHz.jpg
Views: 16
Size:  20.9 KB
Reply



All times are GMT -5. The time now is 08:38 AM.