North Atlantic Maine, New Hampshire, New York, Vermont, Massachusetts, Rhode Island, Connecticut, New Jersey, Delaware, Pennsylvania, Maryland, Washington DC

Maryland Cherokee Club

Thread Tools
 
Search this Thread
 
Old May 12, 2012 | 10:05 PM
  #27376  
NewKindOfClown's Avatar
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default

Originally Posted by jimmy21669

I said GO RANGERS...

well....GO FIGURE...

You went and got hurt, and you weren't cheering the Rangers at your full potential.

In other news, it's my first night at the new place. Yay!
Reply
Old May 12, 2012 | 10:16 PM
  #27377  
kuzican's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

also requesting photoshop to those who are photoshop savvy.

white xj with black flares and flares with the regular two tone fashion in brick red.

you can use one of my pictures in my album.

this red is what i'm interested in. basically flipped around with white instead of black. thanks.
Attached Thumbnails Maryland Cherokee Club-image-1568831070.jpg  
Reply
Old May 13, 2012 | 03:08 AM
  #27378  
xjknut11's Avatar
Senior Member
 
Joined: Mar 2011
Posts: 590
Likes: 0
From: Sykesville, MD
Year: 1990
Model: Cherokee
Engine: 4.0 L
Default

morning all, wake up...or sleep in, but tell your mommas happy mothers day!

yellaklein...in that 93 country your parting...what happens to be the color of the seats?? I'm interested possibly
Reply
Old May 13, 2012 | 07:12 AM
  #27379  
SDC's Avatar
SDC
Seasoned Member
 
Joined: Mar 2012
Posts: 411
Likes: 0
From: Glen Burnie, MD
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by kuzican
center console latch - gone4x4
if C8.25 - 94cherokeeman

I will be going to get pictures and possibly bringing it back to my house on monday. as for those who want parts, for some of the bigger stuff, you might need to come up to me, and help me pull it off.

i will be keeping a list of who gets what and such as well (obviously)
Im interested in the transfer case if its a 242. Actually only NEED the output shaft but we can talk about that.
Reply
Old May 13, 2012 | 07:38 AM
  #27380  
cgarrett's Avatar
Senior Member
 
Joined: Dec 2011
Posts: 500
Likes: 0
From: MoCo, Maryland
Year: 1994
Model: Cherokee
Default

Name:  550856_3578010941771_1618077349_2795974_910772237_n.jpg
Views: 18
Size:  274.8 KB

for those of you that don't belong to the maryland jeeps/element offroad fb group, here is the behind picture of my almost flip. a person from the group that saved me posted it on the fb page this morning
Reply
Old May 13, 2012 | 07:39 AM
  #27381  
kuzican's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by SDC
Im interested in the transfer case if its a 242. Actually only NEED the output shaft but we can talk about that.
soon as I found out, I'll let you know
Reply
Old May 13, 2012 | 07:46 AM
  #27382  
SDC's Avatar
SDC
Seasoned Member
 
Joined: Mar 2012
Posts: 411
Likes: 0
From: Glen Burnie, MD
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by cgarrett


for those of you that don't belong to the maryland jeeps/element offroad fb group, here is the behind picture of my almost flip. a person from the group that saved me posted it on the fb page this morning
Holly ****e. That was wicked close. The trail in the pic doesn't look that bad, what was the actuall cause for the near roll.

Where was this?

Last edited by SDC; May 13, 2012 at 07:49 AM.
Reply
Old May 13, 2012 | 07:47 AM
  #27383  
SDC's Avatar
SDC
Seasoned Member
 
Joined: Mar 2012
Posts: 411
Likes: 0
From: Glen Burnie, MD
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by kuzican
soon as I found out, I'll let you know
Thank you.
Reply
Old May 13, 2012 | 07:55 AM
  #27384  
cgarrett's Avatar
Senior Member
 
Joined: Dec 2011
Posts: 500
Likes: 0
From: MoCo, Maryland
Year: 1994
Model: Cherokee
Default

Originally Posted by SDC
Holly ****e. That was wicked close. The trail in the pic doesn't look that bad, what was the actuall cause for the near roll.
The trail turns sharp and drops down really steep at that point. I should have been over a couple inches but I wasn't lined up good. The hill is so steep and I was in 4 low so of course the brakes are hard to push so by the time I got to a complete stop it was too late to be able to get my jeep out by myself
Reply
Old May 13, 2012 | 08:05 AM
  #27385  
kuzican's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by SDC
Thank you.
np, anything else you need?
Reply
Old May 13, 2012 | 08:14 AM
  #27386  
SDC's Avatar
SDC
Seasoned Member
 
Joined: Mar 2012
Posts: 411
Likes: 0
From: Glen Burnie, MD
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by cgarrett
The trail turns sharp and drops down really steep at that point. I should have been over a couple inches but I wasn't lined up good. The hill is so steep and I was in 4 low so of course the brakes are hard to push so by the time I got to a complete stop it was too late to be able to get my jeep out by myself
Well nice job keepin it upright.

I had a near roll in an old Ramcharger I used to own. I could see ants running and screaming. The wheels on the driver side folded like a taco, and I think saved me from rolling over. I dont care to ever be in that situation again.
Reply
Old May 13, 2012 | 08:16 AM
  #27387  
SDC's Avatar
SDC
Seasoned Member
 
Joined: Mar 2012
Posts: 411
Likes: 0
From: Glen Burnie, MD
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by kuzican
np, anything else you need?
Hood maybe. I want to hack it up so only if its cheap.
Reply
Old May 13, 2012 | 08:24 AM
  #27388  
jimmy21669's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Originally Posted by kuzican
np, anything else you need?
Front axle shafts....just the shafts
Reply
Old May 13, 2012 | 08:24 AM
  #27389  
jakbob's Avatar
CF Veteran
 
Joined: Dec 2011
Posts: 4,006
Likes: 1
From: Pasadena, MD
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
Default

Originally Posted by cgarrett
The trail turns sharp and drops down really steep at that point. I should have been over a couple inches but I wasn't lined up good. The hill is so steep and I was in 4 low so of course the brakes are hard to push so by the time I got to a complete stop it was too late to be able to get my jeep out by myself
I wanna go on that trail lol
Reply
Old May 13, 2012 | 08:26 AM
  #27390  
kuzican's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by SDC

Hood maybe. I want to hack it up so only if its cheap.
alright, hows 20 bucks sound for a hood then? cheap enough?
Reply



All times are GMT -5. The time now is 08:38 AM.