Maryland Cherokee Club
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Got some nice stress relief today thanks to this thing:
Zeroed in at 100 Yards with about an Inch groups. not bad for a 16.12" barrel on a .22lr. That's an older picture.....
Zeroed in at 100 Yards with about an Inch groups. not bad for a 16.12" barrel on a .22lr. That's an older picture.....
Last edited by kuzican; May 10, 2012 at 08:19 PM.
Seasoned Member
Joined: Mar 2012
Posts: 411
Likes: 0
From: Glen Burnie, MD
Year: 1999
Model: Cherokee
Engine: 4.0
I finished a Savage 17Hmr about 3 months ago. I did a glass bed job on a Boyds thumbhole stock. I polished the bolt, all trigger parts, and firing pin. I also Shimmed out the trigger to remove slop.
I have yet to shoot it.
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
no. It's the Ruger 10/22 Target Tactical edition. Has the same trigger as the Target edition, nice crisp and light trigger pull, and Hammer Forged barrel (actually really nice looking in person), and a Hogue Overmolded stock. Harris Bipod. it came with a smaller one, but I got a bigger one. the magazine is the new Ruger made 25 round, and the scope is a crappy bushnell sportview we had on another gun we didn't use. I actually have a nice rail system on it now with the same scope. I need to get scope rings that have more height to them.
::CF Moderator::
Joined: Sep 2009
Posts: 3,495
Likes: 482
From: Glen Burnie, MD
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0l
Originally Posted by kuzican
no. It's the Ruger 10/22 Target Tactical edition. Has the same trigger as the Target edition, nice crisp and light trigger pull, and Hammer Forged barrel (actually really nice looking in person), and a Hogue Overmolded stock. Harris Bipod. it came with a smaller one, but I got a bigger one. the magazine is the new Ruger made 25 round, and the scope is a crappy bushnell sportview we had on another gun we didn't use. I actually have a nice rail system on it now with the same scope. I need to get scope rings that have more height to them.
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Feb 2012
Posts: 2,574
Likes: 0
From: Laurel, MD
Year: 1998
Model: Cherokee
Engine: 4.0L
Originally Posted by Green2000
I havent come up with a concrete figure yet, but I am thinking in the neighborhood of 3-4 bills for everything welded and ground and ready for paint. That being said if the person helps I would knock it down considerably. At the least I am thinking $100 for the templates or same value in desirable trade. I am hoping to turn the rear bumpers out quick with a tire swing once I finish getting mine built and put it through testing. I will post it up in my sig when I get everything figured out
