Jeep Cherokee Forum

North Atlantic Maine, New Hampshire, New York, Vermont, Massachusetts, Rhode Island, Connecticut, New Jersey, Delaware, Pennsylvania, Maryland, Washington DC

Maryland Cherokee Club

   
Old Nov 6, 2011 | 05:32 PM
Share
  #2176  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
Originally Posted by pulltabmike
Just got back from Frederick. Tim has his tires now, and stitched Jon's jeep back together. I'm tired
They're beautiful, and Mike's son is more shop-competent than I am lol

Originally Posted by DocOrng XJ
Everyone met without me

Thats ok, my weld job probably wouldn't have been as good, haven't mastered thin metal quite yet.
We don't like you cause you suck at welding

Originally Posted by pulltabmike
to hell with the inverter, I'm going for an onboard welder
This better go in Homebrew when you decide it's actually a good idea
Reply
0
Old Nov 6, 2011 | 05:40 PM
Share
  #2177  
pulltabmike's Avatar
pulltabmike
CF Veteran
 
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Default
Originally Posted by NewKindOfClown
They're beautiful, and Mike's son is more shop-competent than I am lol
That's my boy


We don't like you cause you suck at welding
If I would have had more than 5 minutes advanced notice that I was heading to Frederick today, I could have picked ya up Doc


This better go in Homebrew when you decide it's actually a good idea
You practicing to be a moderator??? All my ideas are good ideas, even the ones that suck
Reply
0
Old Nov 6, 2011 | 05:41 PM
Share
  #2178  
96xjclassic's Avatar
96xjclassic
CF Veteran
 
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Default
Originally Posted by pulltabmike
Got lucky with this one, only 2 spots I couldn't close up fully. Stitch welded every 1-2", and grinded everything down as smooth as I could get it.









Turned out real nice mike.
Reply
0
Old Nov 6, 2011 | 05:43 PM
Share
  #2179  
96xjclassic's Avatar
96xjclassic
CF Veteran
 
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Default
Originally Posted by dukie564
Finshed drilling out the center pin holes and couldn't resist a mock up

Dukie, you should just go buy a new one ( or two) from Shmome shmepot. I believe when you are finished mike won't want it back. ( a 13/16th drillbit that is )
Reply
0
Old Nov 6, 2011 | 05:44 PM
Share
  #2180  
pulltabmike's Avatar
pulltabmike
CF Veteran
 
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Default
Originally Posted by 96xjclassic
Turned out real nice mike.
Thanks
Reply
0
Old Nov 6, 2011 | 05:47 PM
Share
  #2181  
pulltabmike's Avatar
pulltabmike
CF Veteran
 
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Default
Originally Posted by 96xjclassic
Dukie, you should just go buy a new one ( or two) from Shmome shmepot. I believe when you are finished mike won't want it back. ( a 13/16th drillbit that is )
I've got a bench grinder that will make it better than new
Reply
0
Old Nov 6, 2011 | 05:47 PM
Share
  #2182  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
Originally Posted by 96xjclassic
Turned out real nice mike.
He wouldn't let me weld scrap metal to Pudgy's Cragars
Reply
0
Old Nov 6, 2011 | 05:49 PM
Share
  #2183  
DocOrng XJ's Avatar
DocOrng XJ
Senior Member
 
Joined: Dec 2010
Posts: 903
Likes: 1
From: Linthicum, Md
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
Default
I can weld 100x better than you'll ever..
But, on another note, I'm sad I don't get to work on my jeep anymore, so I'm just hostile..
Reply
0
Old Nov 6, 2011 | 05:49 PM
Share
  #2184  
pulltabmike's Avatar
pulltabmike
CF Veteran
 
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Default
Originally Posted by NewKindOfClown
He wouldn't let me weld scrap metal to Pudgy's Cragars
Couldn't turn my back on you for a second
Reply
0
Old Nov 6, 2011 | 05:51 PM
Share
  #2185  
96xjclassic's Avatar
96xjclassic
CF Veteran
 
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Default
Originally Posted by NewKindOfClown
He wouldn't let me weld scrap metal to Pudgy's Cragars
Mike gave me a bunch of scrap. If your a good boy all week, we can practice welding this weekend with mine.
Reply
0
Old Nov 6, 2011 | 05:52 PM
Share
  #2186  
pulltabmike's Avatar
pulltabmike
CF Veteran
 
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Default
Originally Posted by DocOrng XJ
I can weld 100x better than you'll ever..
But, on another note, I'm sad I don't get to work on my jeep anymore, so I'm just hostile..
I asked him to hand me the stinger, and he handed me the *ss end of a bee
Reply
0
Old Nov 6, 2011 | 05:53 PM
Share
  #2187  
pulltabmike's Avatar
pulltabmike
CF Veteran
 
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Default
Originally Posted by 96xjclassic
Mike gave me a bunch of scrap. If your a good boy all week, we can practice welding this weekend with mine.
I'll get you more....
Reply
0
Old Nov 6, 2011 | 05:58 PM
Share
  #2188  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
Originally Posted by pulltabmike
Couldn't turn my back on you for a second
Couldn't what? I was behind you for a half hour, punching holes through my rusted floorboard with a screwdriver
Reply
0
Old Nov 6, 2011 | 05:58 PM
Share
  #2189  
DocOrng XJ's Avatar
DocOrng XJ
Senior Member
 
Joined: Dec 2010
Posts: 903
Likes: 1
From: Linthicum, Md
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
Default
Lol
Sounds like fun time to be had.
Reply
0
Old Nov 6, 2011 | 06:00 PM
Share
  #2190  
96xjclassic's Avatar
96xjclassic
CF Veteran
 
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Default
Originally Posted by pulltabmike
I'll get you more....
Cool, thanks. I like metal.
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 12:34 PM.