Maryland Cherokee Club
CF Veteran
Joined: Aug 2011
Posts: 4,323
Likes: 0
From: New Market
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by Green2000
1988 Mustang GT twin turbo, 1300 Horse with two stage nitrous, got clocked by the cops on Rt 22 heading from pittsburgh to Blairsville, PA doing 188 in a 55..... We were ahead of the GSXR1000 we were racing 
Senior Member
Joined: Mar 2011
Posts: 590
Likes: 0
From: Sykesville, MD
Year: 1990
Model: Cherokee
Engine: 4.0 L
Well, back to school in the morning
CF Veteran
Joined: Oct 2009
Posts: 2,300
Likes: 0
From: Alaska
Model: Cherokee
havent driven many fast cars.... but ive ridden/wheelied a huge variety of streetbikes...except zx14 and a busa... i had an r1 but i got rid of it cause i was too young and dumb lol just cruise down the freeway at 170. my buddy at work let me drift his M3 a couple days ago that thing handled nice!
CF Veteran
Joined: Feb 2012
Posts: 2,961
Likes: 0
From: Sykesville, Md
Year: 2000
Model: Cherokee
Engine: 4.0
It wasnt mine, my buddy at school built it from the ground up, we were out at a bar and heading back dude talked trash at the last stop light on 22 leaving Pitt, and it was on. As I remember I could have shat diamonds I was so puckered lol. Warped all 4 rotors and 3 pads disintegrated trying to slow down to make our exit ramp and we came in too hot and didnt make the right hand turn and broke everything on the drivers front lol I got to walk the rest of the 23 miles back to my dorm at 3Am and my buddy spent 3 days in lockup and had 1400 in fines.... totally worth it
As we say at the Wyotech in Blairsville, the techers have paid for all the streetlights and new sidewalks in Blairsville lol
As we say at the Wyotech in Blairsville, the techers have paid for all the streetlights and new sidewalks in Blairsville lol
Senior Member
Joined: Aug 2011
Posts: 994
Likes: 0
From: Bowie, MD
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Two things.
1. I need someone(s) to help me cut this work bench inside my garage in half, in order to put my toolbox in its place. I need to make room for the new bike.
This is the work bench. It's very old and made of wood. It should be an easy job, I just don't have the tools to cut it.
This leads me to my second point.
It's Friday, it's gorgeous, and it's a great day for an impromptu gathering of fellow Jeep lovers. If a few of you would like to swing by this afternoon starting as soon as I post this, until whenever, feel free to. Most of you have my number and address. If you're interested and you don't have those things, simply PM me. I don't have a grill yet So maybe someone has a camp grill we could use to flame some burgers or dogs or whatever. Let me know 
1. I need someone(s) to help me cut this work bench inside my garage in half, in order to put my toolbox in its place. I need to make room for the new bike.
This is the work bench. It's very old and made of wood. It should be an easy job, I just don't have the tools to cut it.
This leads me to my second point.
It's Friday, it's gorgeous, and it's a great day for an impromptu gathering of fellow Jeep lovers. If a few of you would like to swing by this afternoon starting as soon as I post this, until whenever, feel free to. Most of you have my number and address. If you're interested and you don't have those things, simply PM me. I don't have a grill yet
So maybe someone has a camp grill we could use to flame some burgers or dogs or whatever. Let me know
Senior Member
Joined: Aug 2011
Posts: 994
Likes: 0
From: Bowie, MD
Year: 2000
Model: Cherokee
Engine: 4.0L I6
CF Veteran
Joined: Nov 2010
Posts: 5,151
Likes: 0
From: glen burnie md
Year: 2000
Model: Cherokee
)--
Senior Member
Joined: Aug 2011
Posts: 994
Likes: 0
From: Bowie, MD
Year: 2000
Model: Cherokee
Engine: 4.0L I6
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Two things.
1. I need someone(s) to help me cut this work bench inside my garage in half, in order to put my toolbox in its place. I need to make room for the new bike.
This is the work bench. It's very old and made of wood. It should be an easy job, I just don't have the tools to cut it.
This leads me to my second point.
It's Friday, it's gorgeous, and it's a great day for an impromptu gathering of fellow Jeep lovers. If a few of you would like to swing by this afternoon starting as soon as I post this, until whenever, feel free to. Most of you have my number and address. If you're interested and you don't have those things, simply PM me. I don't have a grill yet So maybe someone has a camp grill we could use to flame some burgers or dogs or whatever. Let me know
1. I need someone(s) to help me cut this work bench inside my garage in half, in order to put my toolbox in its place. I need to make room for the new bike.
This is the work bench. It's very old and made of wood. It should be an easy job, I just don't have the tools to cut it.
This leads me to my second point.
It's Friday, it's gorgeous, and it's a great day for an impromptu gathering of fellow Jeep lovers. If a few of you would like to swing by this afternoon starting as soon as I post this, until whenever, feel free to. Most of you have my number and address. If you're interested and you don't have those things, simply PM me. I don't have a grill yet
So maybe someone has a camp grill we could use to flame some burgers or dogs or whatever. Let me know 
CF Veteran
Joined: Feb 2012
Posts: 2,574
Likes: 0
From: Laurel, MD
Year: 1998
Model: Cherokee
Engine: 4.0L
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Just finished vacuuming the interior. Nothin like detailing your new Jeep for 3 hours cause everyone else got to go home early
Got the bench to slide back, too. I can stretch my legs now
Got the bench to slide back, too. I can stretch my legs now
