jeeper in need of some help in south jersey
#1
CF Veteran
Thread Starter
Join Date: Nov 2009
Location: Manahawkin New Jersey
Posts: 1,291
Likes: 0
Received 1 Like
on
1 Post
Year: 96'
Model: Cherokee
Engine: 4.0 160k banks header dumping after the cat
jeeper in need of some help in south jersey
hey guys, well i finally have my tube doors in and to be honest it was a major the driver side door came out fine and i can now drop the original door back in just like it should be. so i did that side right. the other side not so good....
i ended up resorting to a lot of sawzalling and chiseling to get the door off. both hinges on the door are broken, thats not to big of a deal because i really don't mind just getting a whole new door from a junkyard.
the bad thing is that i ended up cutting the bottom hinge off that is on the unibody. does anybody know how to weld hinges back on? thats really all i need. I WILL PAY. or maybe if somebody could just recommend a good person in the area for it. THANKS IN ADVANCE FOR EVEN READING THIS
i ended up resorting to a lot of sawzalling and chiseling to get the door off. both hinges on the door are broken, thats not to big of a deal because i really don't mind just getting a whole new door from a junkyard.
the bad thing is that i ended up cutting the bottom hinge off that is on the unibody. does anybody know how to weld hinges back on? thats really all i need. I WILL PAY. or maybe if somebody could just recommend a good person in the area for it. THANKS IN ADVANCE FOR EVEN READING THIS
#2
CF Veteran
Thread Starter
Join Date: Nov 2009
Location: Manahawkin New Jersey
Posts: 1,291
Likes: 0
Received 1 Like
on
1 Post
Year: 96'
Model: Cherokee
Engine: 4.0 160k banks header dumping after the cat
i've been searching around and it looks like i can find all of the hinge parts i need to replace. so thats good. its just that these parts need to be put on and if i had that hard of a time taking the door off fogetta putting it back on lol
#4
CF Veteran
Thread Starter
Join Date: Nov 2009
Location: Manahawkin New Jersey
Posts: 1,291
Likes: 0
Received 1 Like
on
1 Post
Year: 96'
Model: Cherokee
Engine: 4.0 160k banks header dumping after the cat
hey man thanks for the reply, what i need is somebody to weld on a new hinge on my jeep. the female i guess you could call it. and a new hinge on the door the male hinge... if it wasn't such an important weld that needs to be done the right way i would just have at it with a buddies welder myself, but i know it won't be right lol
#5
Member
Join Date: Mar 2009
Location: stratford nj
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
i been a welder for about 18yrs,, im sure i wouldnt have a problem with it does it need to be done at ur place? if so what kinda power do ya have at your house i would need 220 with my machine
#6
CF Veteran
Thread Starter
Join Date: Nov 2009
Location: Manahawkin New Jersey
Posts: 1,291
Likes: 0
Received 1 Like
on
1 Post
Year: 96'
Model: Cherokee
Engine: 4.0 160k banks header dumping after the cat
not at all man i can come to you whatever you want....i'll order the hinges and stuff and then i guess we'll take it from there? thanks brotha, i have the tube door on there now but even that doesn't really fit right since its only on the top hinge.
Thread
Thread Starter
Forum
Replies
Last Post
The Aristocrat
Wanted
2
02-25-2017 01:17 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)