South Florida Dysfunctional 4x4's
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Senior Member
Joined: Dec 2010
Posts: 1,358
Likes: 0
From: Orlando-Miami
Year: 1993
Model: Cherokee
Engine: 4.0 HO
What else did stock 4x4 Cherokees come with in the front?
Just scored ford f350 front and rear dana 60s for $400 for a friend. I'll be picking up another front one for my self. My dodge d60 which I haven't touched yet doesn't have locking hubs
Just scored ford f350 front and rear dana 60s for $400 for a friend. I'll be picking up another front one for my self. My dodge d60 which I haven't touched yet doesn't have locking hubs
Thread Starter
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Some had dana 44 in Europe from factory.
Senior Member
Joined: Dec 2010
Posts: 1,358
Likes: 0
From: Orlando-Miami
Year: 1993
Model: Cherokee
Engine: 4.0 HO
94-01 dodge are coil sprung drivers drop low pinion, which is what I have. Also has CAD disconnect which I was planning to get a 1 piece shaft from a 01 dodge (which had the CAD eliminated)
And that's pretty cool. I assume the d44 the European Cherokees had was a TJ Rubi 44? Or was it a true 44 with 44 knuckles/outers?
And that's pretty cool. I assume the d44 the European Cherokees had was a TJ Rubi 44? Or was it a true 44 with 44 knuckles/outers?
Senior Member
Joined: Feb 2013
Posts: 1,273
Likes: 0
From: Alpharetta, GA
in other news I cleaned my AIC and throttle body when I got off work today. what a complete night and day difference. It runs so much smoother now. also my injectors came in today (thanks mike 
). I was able to get them rebuilt and ready to install. I would have installed them tonight, but I didn't have the fuel line tool to get the line off the rail, plus it was poker night at a friend's house so they will go in either tomorrow or Monday.
on a side note, no I didn't win tonight.... almost had it though. went all in when me and the last guy were even with chips (we finally got to the point where we just wanted it to end) and lost my pair of queens to his pocket kings..... oh well, I only lost $10 and it was more than worth it considering we played for more than 4 hours with 7 people playing.
). I was able to get them rebuilt and ready to install. I would have installed them tonight, but I didn't have the fuel line tool to get the line off the rail, plus it was poker night at a friend's house so they will go in either tomorrow or Monday. on a side note, no I didn't win tonight.... almost had it though. went all in when me and the last guy were even with chips (we finally got to the point where we just wanted it to end) and lost my pair of queens to his pocket kings..... oh well, I only lost $10 and it was more than worth it considering we played for more than 4 hours with 7 people playing.
Thread Starter
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
94-01 dodge are coil sprung drivers drop low pinion, which is what I have. Also has CAD disconnect which I was planning to get a 1 piece shaft from a 01 dodge (which had the CAD eliminated)
And that's pretty cool. I assume the d44 the European Cherokees had was a TJ Rubi 44? Or was it a true 44 with 44 knuckles/outers?
And that's pretty cool. I assume the d44 the European Cherokees had was a TJ Rubi 44? Or was it a true 44 with 44 knuckles/outers?
Last edited by freegdr; May 26, 2013 at 04:34 AM.
Senior Member
Joined: Dec 2010
Posts: 1,358
Likes: 0
From: Orlando-Miami
Year: 1993
Model: Cherokee
Engine: 4.0 HO
I would prefer the Ford hi pinion with lockouts it's just that everyone wants gold for them around here. Until now that I found my source for another one.