South Florida Dysfunctional 4x4's
Seasoned Member
Joined: Jan 2013
Posts: 860
Likes: 1
Model: Cherokee
He wasn't there. His coworkers said he had to swerve to avoid a 4 wheeler on the way to mud fest in okeechobee (sp?) a few weeks back. Looked like a 6.5 RC lift. Definetly RC. But dude was running bone stock steering components. His trackbar angle was horrible!!!!
Hope the guys OK!!!
Member
Joined: Apr 2008
Posts: 396
Likes: 0
From: Boca Raton, Florida
Year: 1993
Model: Cherokee
Engine: 4.0
No offense and not to jump to conclusion but didn't it run fine before you just changed the cap, rotor, plug wires, etc?
If it was OK before and now it is missing my guess would be that you have a wire crossed, a wire off the cap or plug, a bad NEW wire, bad cap, or something you changed has failed(rare)...
The list goes on and on of what it could be but if it was fine and now its missing that tells me either bad new parts or installer error...
Just trying to help before you go too deep or get crazy on "What it could be"...
If it was OK before and now it is missing my guess would be that you have a wire crossed, a wire off the cap or plug, a bad NEW wire, bad cap, or something you changed has failed(rare)...
The list goes on and on of what it could be but if it was fine and now its missing that tells me either bad new parts or installer error...
Just trying to help before you go too deep or get crazy on "What it could be"...
Senior Member
Joined: Feb 2013
Posts: 1,273
Likes: 0
From: Alpharetta, GA
that was me that replaced all that. and i have a miss on cyl 1 now. still havn't had a chance to take a look at it though. it ran great for about 4 days, and then started it up and i knew right away before the light came on. now though, it's only doing it after it heats up. on cold starts it's fine til it hits opperating temp. i'll have time to look at it tonight though.
Member
Joined: Apr 2008
Posts: 396
Likes: 0
From: Boca Raton, Florida
Year: 1993
Model: Cherokee
Engine: 4.0
I got it running.
Had spark and 40 PSI of fuel.
Started cranking it gave throttle and it fired up.
Now have engine codes 12 and 24.
12 is power to ECM.
24 is TPS
Had spark and 40 PSI of fuel.
Started cranking it gave throttle and it fired up.
Now have engine codes 12 and 24.
12 is power to ECM.
24 is TPS
CF Veteran
Joined: Oct 2011
Posts: 1,976
Likes: 0
From: South Central Florida
Year: 1995
Model: Cherokee
Engine: 4.0
You can never have enough of those things...lol
They are like gold for a Redneck.
Welcome to the forum...
OK, I mixed two of you up, My Bad...like I said no offense just trying to point in the right direction
Thats odd, I would check your plug wires as it is harder for them to work as the temp on the wire goes up...coil has more resistance as it heats up as well but that "should" affect all cylinders if it was the coil...
CPS may be doing something stupid also.
I may hit Mudfest on the way home Sunday!!!
They are like gold for a Redneck.
Welcome to the forum...
OK, I mixed two of you up, My Bad...like I said no offense just trying to point in the right direction
that was me that replaced all that. and i have a miss on cyl 1 now. still havn't had a chance to take a look at it though. it ran great for about 4 days, and then started it up and i knew right away before the light came on. now though, it's only doing it after it heats up. on cold starts it's fine til it hits opperating temp. i'll have time to look at it tonight though.
CPS may be doing something stupid also.
I may hit Mudfest on the way home Sunday!!!
Senior Member
Joined: Feb 2013
Posts: 1,273
Likes: 0
From: Alpharetta, GA
Member
Joined: Apr 2008
Posts: 396
Likes: 0
From: Boca Raton, Florida
Year: 1993
Model: Cherokee
Engine: 4.0
OK, I mixed two of you up, My Bad...like I said no offense just trying to point in the right direction
No offense taken I welcome any advise from someone that is kind enough to give it.
No offense taken I welcome any advise from someone that is kind enough to give it.
Senior Member
Joined: Feb 2013
Posts: 1,273
Likes: 0
From: Alpharetta, GA
