South Florida Dysfunctional 4x4's
Thread Starter
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Got all of the old steering stuff out this afternoon. Gonna get up bright and early and put all the new stuff in. New steering damper didn't come with hardware and the bolt on the old one is stripped so the castle nut just twists.
Goodyear wranglers are only $64 at walmart for 235/75/15 so gonna go grab a set tomorrow also. Getting there. Ready to go wheelin' with some of yall.
Goodyear wranglers are only $64 at walmart for 235/75/15 so gonna go grab a set tomorrow also. Getting there. Ready to go wheelin' with some of yall.
Thread Starter
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Got all of the old steering stuff out this afternoon. Gonna get up bright and early and put all the new stuff in. New steering damper didn't come with hardware and the bolt on the old one is stripped so the castle nut just twists.
Goodyear wranglers are only $64 at walmart for 235/75/15 so gonna go grab a set tomorrow also. Getting there. Ready to go wheelin' with some of yall.
Goodyear wranglers are only $64 at walmart for 235/75/15 so gonna go grab a set tomorrow also. Getting there. Ready to go wheelin' with some of yall.
Thread Starter
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Thread Starter
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Damn tractors. Almost flipped one as a kid.
Got all the tie rods, sleeve and steering damper on today. Took it in for an alignment. Still makes a pop when i turn sometimes.
Got all the tie rods, sleeve and steering damper on today. Took it in for an alignment. Still makes a pop when i turn sometimes.
I read somewhere in the build threads, that loosening the bolt on the track bar where it goes on the frame, just a bit, will solve that problem with after market parts. Something about being over torqued. Just a suggestion.



