Quick Questions for Georgians
Newbie
Joined: Dec 2010
Posts: 29
Likes: 0
From: warner robins GA
Year: 1988/1992
Model: Cherokee
Engine: 1992 4.0
Yea it was a really good buy over all he wasn't a mechanic thou nor a electrician lol I had to redo a lot of stuff. But good start with the engine already in and all the added stuff
Newbie
Joined: Dec 2010
Posts: 29
Likes: 0
From: warner robins GA
Year: 1988/1992
Model: Cherokee
Engine: 1992 4.0
The engine originally in it caught fire so he put the 4.0. From his 92 in it but that's about as far it got not nuts on mounts or anything TC linkage was all apart and upside down so 2H was actually 4Lo fuel pump just dangling he took a 3 phase motor cable and used it for the battery cables to the back end and just twisted it to the original cables so needless to say those got very hot. But yea for the most part all the stuff was there just had to make it work which it runs great now just haven't had it out to make sure transmission is shifting.
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Well that's good... was a good deal... I endes up getting. 95 2 door... I like the 2 doors more probly cause that's what I came across when I first got into them... lol... I'm a chopped top Guy as well... didn't pay but $500 for it... a alternator and the gas tank from my old Cherokee and a eBay sending unit and fuel pump I should be good... thought only bad fuel pump and alternator but pulls the pump and it was all rsuted to crap to gotta use my old tank... but now bad for about $700 invested...
Newbie
Joined: Dec 2010
Posts: 29
Likes: 0
From: warner robins GA
Year: 1988/1992
Model: Cherokee
Engine: 1992 4.0
Yea I'm getting a new tank for this one its pretty bad inside from sitting with the pump dangling, I thought about chopping the back on this one later this year. I really hope the tranny shifts otherwise ill be doing that in 2 weeks can't drive it right now cause I don't have rims for it yet, the ones on it are round jackstands the backspace is 5" so they hit the sway bar in the rear and rub up front
But its getting there I'm happy with it
But its getting there I'm happy with it
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Originally Posted by JPs1988
Yea I'm getting a new tank for this one its pretty bad inside from sitting with the pump dangling, I thought about chopping the back on this one later this year. I really hope the tranny shifts otherwise ill be doing that in 2 weeks can't drive it right now cause I don't have rims for it yet, the ones on it are round jackstands the backspace is 5" so they hit the sway bar in the rear and rub up front
But its getting there I'm happy with it
But its getting there I'm happy with it
Newbie
Joined: Dec 2010
Posts: 29
Likes: 0
From: warner robins GA
Year: 1988/1992
Model: Cherokee
Engine: 1992 4.0
Yea I'm going to drop the rear sway bar here soon, I just talked to paul the other day about rims mabey monday when kids are at school ill take it on the road and see if everything shifts if not may have to talk to him about that lol but overall it was a good price, picked it up for 1K rather then the 1500 he wanted and he towed it to the house for me. Lot of nit picky stuff I did to it but in the end ill make it a monster. Have to install my coax tonight and my antenna. Running out of things to do that I already bought lol
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 10, 2015 09:21 AM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 7, 2015 08:16 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 7, 2015 07:50 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 7, 2015 05:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



