Jeep Beach 2012
CF Veteran
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
Originally Posted by huntingman2706217
We could just meet there since thats where most of us is stayin... Less drivers if everyones drinkin... Lol
CF ADMIN
Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Originally Posted by huntingman2706217
We could just meet there since thats where most of us is stayin... Less drivers if everyones drinkin... Lol
CF ADMIN
Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Originally Posted by Drewjharper1900
Hey this might be a given, but is anyone bringing an air compressor?
CF Veteran
Joined: Nov 2010
Posts: 1,686
Likes: 1
From: Miami
Year: 1999
Model: Cherokee
Engine: 4.0
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Im bringing my jumper box with small compressor as well...
Got a ton done to the mj... Jacked up and pulles front tires off... Front axle is dropped down... Still gotta undo the control arms but everything else is off... Swapped front stainless brake lines on... Cut of oem perches from 8.8... Pulled and swapped all the brake lines, calipers, rotors to the 8.8 I wanted to use from the other 8.8... Painted the d30 and 8.8... Welded on the new shock mounts to the dana 30 to get rid of the bpe's... Clear coated all 4 of my wheels a **** ton... And I think thats it... All in about 3.5hrs... Not to bad...
Got my yoke flange in the mail to for the driveshaft... Tomorrow I bolt and weld in the 8.8 and dana 30 I hope... And get tires put on the wheels... and lift will be done too... I gotta figure something out for a trac bar... No more moneys to blow... Lol
Got a ton done to the mj... Jacked up and pulles front tires off... Front axle is dropped down... Still gotta undo the control arms but everything else is off... Swapped front stainless brake lines on... Cut of oem perches from 8.8... Pulled and swapped all the brake lines, calipers, rotors to the 8.8 I wanted to use from the other 8.8... Painted the d30 and 8.8... Welded on the new shock mounts to the dana 30 to get rid of the bpe's... Clear coated all 4 of my wheels a **** ton... And I think thats it... All in about 3.5hrs... Not to bad...
Got my yoke flange in the mail to for the driveshaft... Tomorrow I bolt and weld in the 8.8 and dana 30 I hope... And get tires put on the wheels... and lift will be done too... I gotta figure something out for a trac bar... No more moneys to blow... Lol
CF ADMIN
Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Originally Posted by huntingman2706217
Im bringing my jumper box with small compressor as well...
Got a ton done to the mj... Jacked up and pulles front tires off... Front axle is dropped down... Still gotta undo the control arms but everything else is off... Swapped front stainless brake lines on... Cut of oem perches from 8.8... Pulled and swapped all the brake lines, calipers, rotors to the 8.8 I wanted to use from the other 8.8... Painted the d30 and 8.8... Welded on the new shock mounts to the dana 30 to get rid of the bpe's... Clear coated all 4 of my wheels a **** ton... And I think thats it... All in about 3.5hrs... Not to bad...
Got my yoke flange in the mail to for the driveshaft... Tomorrow I bolt and weld in the 8.8 and dana 30 I hope... And get tires put on the wheels... and lift will be done too... I gotta figure something out for a trac bar... No more moneys to blow... Lol
Got a ton done to the mj... Jacked up and pulles front tires off... Front axle is dropped down... Still gotta undo the control arms but everything else is off... Swapped front stainless brake lines on... Cut of oem perches from 8.8... Pulled and swapped all the brake lines, calipers, rotors to the 8.8 I wanted to use from the other 8.8... Painted the d30 and 8.8... Welded on the new shock mounts to the dana 30 to get rid of the bpe's... Clear coated all 4 of my wheels a **** ton... And I think thats it... All in about 3.5hrs... Not to bad...
Got my yoke flange in the mail to for the driveshaft... Tomorrow I bolt and weld in the 8.8 and dana 30 I hope... And get tires put on the wheels... and lift will be done too... I gotta figure something out for a trac bar... No more moneys to blow... Lol
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
35/12.50r15 general grabber red letters on oem 12 spoke wheels I stripped of all paint... hit them with #00 steel wool as best I could and clear coated everything... No more gray...
CF ADMIN
Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Originally Posted by huntingman2706217
35/12.50r15 general grabber red letters on oem 12 spoke wheels I stripped of all paint... hit them with #00 steel wool as best I could and clear coated everything... No more gray...
Thread Starter
CF Veteran
Joined: Aug 2010
Posts: 8,387
Likes: 1
From: The Florida State University
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
35/12.50r15 general grabber red letters on oem 12 spoke wheels I stripped of all paint... hit them with #00 steel wool as best I could and clear coated everything... No more gray...
Attachment 111565
Attachment 111565
