Southeast Tennessee, Mississippi, Alabama, Georgia, Florida

Jeep Beach 2012

Thread Tools
 
Search this Thread
 
Old Apr 24, 2012 | 07:06 PM
  #166  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

They rubber should reach the outer C's yes... right now my axle shaft is at a angle down because of this and i will eat up shaft bearings if i drive it around like this... yes its a 30... from a 90
Reply
Old Apr 24, 2012 | 07:11 PM
  #167  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

that what im trying to explain if the taper of new joint is different from old one its not allowing lower joint to go up letting upper joint seat more...
Reply
Old Apr 24, 2012 | 07:15 PM
  #168  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

heres even dana ball joints ...http://www.4wd.com/Jeep-Drivetrain-J...n=D%2fS706944x
Reply
Old Apr 24, 2012 | 07:15 PM
  #169  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

i know that? i said that... i gotta get the right joints... these are to long... but different manufacturers have these listed as the right ones... they are not... this is why everyone is having issues buying from the parts stores and them not working like these...
Reply
Old Apr 24, 2012 | 07:18 PM
  #170  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

Originally Posted by freegdr

these are not what i have OEM nor anything like the new ones...
Reply
Old Apr 24, 2012 | 07:30 PM
  #171  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

there just like my oems never new danas were this cheap i gonna buy two sets and get the napa crap off mine....
Reply
Old Apr 24, 2012 | 07:34 PM
  #172  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

not the OEM's i have... im telling you they ARE NOT THE SAME AS WHAT I HAVE ON MY TWO AXLES... why i do not know... but they are NOT... lol
Reply
Old Apr 24, 2012 | 07:37 PM
  #173  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

my guess is they are 100% original... then in the later years they were replaced with this newer model...
Reply
Old Apr 24, 2012 | 07:37 PM
  #174  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

see
Attached Thumbnails Jeep Beach 2012-forumrunner_20120424_203601.jpg   Jeep Beach 2012-forumrunner_20120424_203610.jpg   Jeep Beach 2012-forumrunner_20120424_203617.jpg  
Reply
Old Apr 24, 2012 | 07:38 PM
  #175  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

new ones are 2.5in the old ones are 2in...
Reply
Old Apr 24, 2012 | 07:48 PM
  #176  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

so you just have the completely wrong part to begin with that a hole different thing...
Reply
Old Apr 24, 2012 | 08:02 PM
  #177  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

yes and no... mine are to long from what i originally had yes... but the ones you are showing me are not the ones that came in either axle too... maybe the aftermarket replacement or stock upgrade i dont know.... but they are different also for whatever reason... i dont have a threaded spacer thing or a c clip... neither axle does... they look identical to my new ones except they are longer...
Reply
Old Apr 24, 2012 | 08:04 PM
  #178  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

ones i got are like these... and they look the same as my stock ones... these actually look shorter in the picture as well...

http://www.ebay.com/itm/4-BALL-JOINT...#ht_2032wt_905
Reply
Old Apr 24, 2012 | 08:15 PM
  #179  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

Originally Posted by huntingman2706217
ones i got are like these... and they look the same as my stock ones... these actually look shorter in the picture as well...

http://www.ebay.com/itm/4-BALL-JOINT...#ht_2032wt_905
dont look like mine at all and 37 dollars you new better didnt ya ...lol
Reply
Old Apr 24, 2012 | 08:23 PM
  #180  
huntingman2706217's Avatar
MJ>XJ
 
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Default

i dont remember what i paid... lol... i cant find the ones i got or i would try and return them... even though its like 4 months later... worth a shot... lol... oh well... ill probly get them spicer ones you posted though and try them... thats not a bad price at all...
Reply



All times are GMT -5. The time now is 10:00 AM.