ohio roll call
CF Veteran
Joined: Jun 2011
Posts: 2,460
Likes: 0
From: Dayton, Ohio
Year: 1992
Model: Comanche
Engine: 4.0
Originally Posted by Pnguyen7
Nice to meet u pat. Im in columbus. I need tires.
Seasoned Member
Joined: Nov 2011
Posts: 266
Likes: 0
From: Newark, OHIO
Year: 1999
Model: Cherokee
Engine: 4.0L
Anyone doing any trail ridding this saturday? Wanting to go to wellsville or someplace to test out some new goodies? Will trailer a few hours away if its worth it.....
Seasoned Member
Joined: Feb 2012
Posts: 369
Likes: 0
From: Oxford, OH
Year: 1996
Model: Cherokee
Engine: 4.0
Finished for the day! I got all four ball joints replaced, both front shocks, and actually tightened the trackbar (Never going to that shop again...)
Figured out one rattle was the exhaust pipe sitting on the trans brace. The hanger by the transmission broke in half and I just had to weld it back together. Woohoo owning a MIG welder!
Now my sway bar and tres are on the list for the front end, but not for a few months, and the bastard pack for the back hopefully later this week, along with an alignment.
Figured out one rattle was the exhaust pipe sitting on the trans brace. The hanger by the transmission broke in half and I just had to weld it back together. Woohoo owning a MIG welder!
Now my sway bar and tres are on the list for the front end, but not for a few months, and the bastard pack for the back hopefully later this week, along with an alignment.
Seasoned Member
Joined: Feb 2012
Posts: 369
Likes: 0
From: Oxford, OH
Year: 1996
Model: Cherokee
Engine: 4.0
Originally Posted by RazorXJ
Came home from fishing and noticed my transmission's diaper is full...it's leaking from seemingly everywhere....wtf??
Senior Member
Joined: Nov 2011
Posts: 561
Likes: 0
Model: Cherokee
Originally Posted by cookrw
Finished for the day! I got all four ball joints replaced, both front shocks, and actually tightened the trackbar (Never going to that shop again...)
Figured out one rattle was the exhaust pipe sitting on the trans brace. The hanger by the transmission broke in half and I just had to weld it back together. Woohoo owning a MIG welder!
Now my sway bar and tres are on the list for the front end, but not for a few months, and the bastard pack for the back hopefully later this week, along with an alignment.
Figured out one rattle was the exhaust pipe sitting on the trans brace. The hanger by the transmission broke in half and I just had to weld it back together. Woohoo owning a MIG welder!
Now my sway bar and tres are on the list for the front end, but not for a few months, and the bastard pack for the back hopefully later this week, along with an alignment.
Banned
Joined: Feb 2012
Posts: 948
Likes: 0
From: Ohio
Year: 1999
Model: Cherokee
Engine: 4.0l i6
Hey anyone familiar with ohios laws about needing fender flares and how far out the tires can stick out? I'm in a part where if they think they can nail you on something they will so I just wanted to know before I went flareless
CF Veteran
Joined: Jan 2011
Posts: 11,176
Likes: 1
From: Ohio
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by Scott0821
Hey anyone familiar with ohios laws about needing fender flares and how far out the tires can stick out? I'm in a part where if they think they can nail you on something they will so I just wanted to know before I went flareless
CF Veteran
Joined: Jan 2011
Posts: 11,176
Likes: 1
From: Ohio
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by b.mcdaniel.2009
Anyone doing any trail ridding this saturday? Wanting to go to wellsville or someplace to test out some new goodies? Will trailer a few hours away if its worth it.....