Just did an IRO adjust. TB last week. new ends, poly axle side. They are both tight as hell. All TREs were just done new Draglink.
It has to be a balance or something else. Im doing a balance wendsday so well see. Ps alaignment done by me with a tape measure. its drives straight

 

Shocks good? If they are it has to be the tires, have the fronts balanced, how bad are your tires?

 

they are streets so not bad at all. worn even even tho i don't rotate. shocks are white body, nitro RC shocks from 1.5yrs ago.

 

tires are a big part of it. my old ones still had desent tread on them but were hard compared to the new softer tires. i could hit my old ones w a hammer n it would damn near fly back out of my hand. they do the same on the road when u hit bumps hard. they hit back!

 

No bumps perfectly flat new pavement. 45mph shakes. And take that im saying wobble and shake and not death wobble. Its deff not that. it stays the same as i speed up maybe just wobbling faster. so im pretty sure its a balance. my passenger side tires (front and rear) have plugs in them.

 

also tires at 35 psi 31x10.5x15 on 15x10" wheels 4"BS. Just some more info

 

Is get them balanced, sounds to me like that's what it is

 

X2

 

Well still i already know i cant make it. I already took shifts for the weekend. I had them off then they asked if i needed them i said no. And i work fri and sat morning off sunday

 

unity spot light finally installed. just waiting on my Treadwrights. waiting waiting waiting

 

Aren't those retreads?

 

that they are. fourth set that have been in my family. they ride harder, but the price is right

 

Ive driven unbalanced 40" iroks before and they diddnt vibe untill almost 60. What shape was your Trac bar mount on the frame side in?

 

Good. Healthy welds not rusty. Not bent.

 

At least you have had good luck with them