ohio roll call
#2266
CF Veteran
Join Date: Jan 2011
Location: Ohio
Posts: 11,176
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by LongArmXJ
there is a lot of talk about goin to haspin friday the 13th april.
#2269
CF Veteran
Join Date: Apr 2011
Location: Dayton Ohio
Posts: 2,080
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998 classic
Model: Cherokee
Engine: 4.0!!
do you have a pic of what needs cut? that way i can see what you got goin on? as far as welding i can pretty decent but not sure if id want to do the drive shaft cause id feel bad if it broke lmao. I have a good friend that owns a shop in West Carrollton that is a super good welder, mig and tig. any metals too. His name is Jon down at Forced Fab. off of elm street on peirce rd/dr/st?
Last edited by LongArmXJ; 02-14-2012 at 10:03 PM.
#2270
CF Veteran
Join Date: Jan 2011
Location: Ohio
Posts: 11,176
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Where the slip yoke on the driveshaft that weld needs ground off so the yoke is free from the shaft, the shaft needs cut a couple inches then the yoke welded back on
#2271
CF Veteran
Join Date: Apr 2011
Location: Dayton Ohio
Posts: 2,080
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998 classic
Model: Cherokee
Engine: 4.0!!
if you got the yoke seperated from the shaft i could get a good straight cut on it at work. and the weld could get done at my buddies shop or you could use my welder.. that way the weld strength is on you lol.
#2280
Member
Join Date: Jan 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee