kansas roll call!!
#1456
CF Veteran
Join Date: May 2013
Location: Toe Peek Ugh
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 ho
Huge even like a big show almost there will be stockers to rock bouncers it is in disney ok. This will be my first time going..
http://www.pirate4x4.com/forum/usa-s...meats-run.html
http://www.pirate4x4.com/forum/usa-s...meats-run.html
#1458
Member
Join Date: Dec 2012
Location: Moundridge KS
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
#1459
Member
Join Date: Jun 2013
Location: Lawrence
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 straight 6
Hey guys....anyone in the Lawrence area? Ive got a big problem with my 97 xj. It broke down on me two weeks ago friday. I still cant figure the problem out. Im a fairly good mechanic but this one has me stumped. I would greatly appreciate any help before I say f*** it and tow it to a shop...which I cant afford...lol.
#1460
Member
Join Date: Feb 2014
Location: Kansas
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 I6
Hey guys....anyone in the Lawrence area? Ive got a big problem with my 97 xj. It broke down on me two weeks ago friday. I still cant figure the problem out. Im a fairly good mechanic but this one has me stumped. I would greatly appreciate any help before I say f*** it and tow it to a shop...which I cant afford...lol.
#1461
Member
Join Date: Jun 2013
Location: Lawrence
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 straight 6
Heres the whole story. About two weeks ago my jeep wouldnt start. No crank no nothing. I replaced the starter and relay. I then try to start it only to have the key just spin in the cylinder. I replaced the broken ignition actuator and since it was cheap I also replaced the ignition switch and cylinder. Now she will crank all day but thats it. I noticed I didnt hear the fuel pump power up. I have no pressure to the fuel rail. I replaced the relay and that did no good. I checked to make sure I was getting power at the plug before I replaced the pump and thats the problem. No power to the pump. I was curious if the ASD was killing power to the fuel pump? My chilton says nothing about the ASD and gives no diagram for my fuse box. Hell it didn't even give the right diagram for installing the ignition. Im not sure if my ignition is even done correct. I did notice since I replaced the ignition system my door beeper doesn't beep. As you can tell im lost and frazzled. Any ideas?
#1462
Member
Join Date: Feb 2014
Location: Kansas
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 I6
Heres the whole story. About two weeks ago my jeep wouldnt start. No crank no nothing. I replaced the starter and relay. I then try to start it only to have the key just spin in the cylinder. I replaced the broken ignition actuator and since it was cheap I also replaced the ignition switch and cylinder. Now she will crank all day but thats it. I noticed I didnt hear the fuel pump power up. I have no pressure to the fuel rail. I replaced the relay and that did no good. I checked to make sure I was getting power at the plug before I replaced the pump and thats the problem. No power to the pump. I was curious if the ASD was killing power to the fuel pump? My chilton says nothing about the ASD and gives no diagram for my fuse box. Hell it didn't even give the right diagram for installing the ignition. Im not sure if my ignition is even done correct. I did notice since I replaced the ignition system my door beeper doesn't beep. As you can tell im lost and frazzled. Any ideas?
I get off work around 4 pm, would be glad to stop by and look it over. I'm no pro
#1463
Member
Join Date: Feb 2014
Location: Kansas
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 I6
Was just thinking if your ASD relay is bad, swapping it for the fuel pump relay would just cause the fuel pump to not work either. Swap the ASD with another relay. Mine is a 97 as well and the door beeper doesn't work either.
#1464
Member
Join Date: Jun 2013
Location: Lawrence
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 straight 6
I replaced the cps last summer. So I wouldnt think thats the issue although I could of got a crapy one. I completely replaced the ASD relay and the fuel pump relay. Battery was unplugged for a day or so and I checked it with my obd2 scanner...no error codes were found. If you wanna stop by thats cool but you dont gotta go out of your way. I get off work at 4:30.
#1465
Member
Join Date: Jun 2013
Location: Lawrence
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 straight 6
If you wanna come by that would be greatly appreciated. I can change and rebuild parts but electrical is way over my head. And my only help is my dad and he doesn't understand fuel injection at all. Hes all old school. I can leave you my number if you like
#1466
Member
Join Date: Feb 2014
Location: Kansas
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 I6
That's fine. Send it to me in a PM.
#1468
Member
Join Date: Jun 2013
Location: Lawrence
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 straight 6
Anyone here good at understanding diagnostic codes... had issues with my jeep not getting power to the fuel pump for two weeks now. If I bypass the fuel pump relay I get power to the pump. I replaced asd and fuel pump relays....and the cps. Now my obd2 scanner is reading 3 error codes. P1389...no asd relay output voltage at pcm. P1388...auto shutdown relay control circuit. And P1282...fuel pump relay control circuit. Ive replaced the relays....in English does this meen I have bad wires in both circuits or is my pcm fried and in need of replacing? Can someone translate what thoes codes meen?
#1469
CF Veteran
Join Date: Aug 2012
Location: ks
Posts: 1,539
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Anyone here good at understanding diagnostic codes... had issues with my jeep not getting power to the fuel pump for two weeks now. If I bypass the fuel pump relay I get power to the pump. I replaced asd and fuel pump relays....and the cps. Now my obd2 scanner is reading 3 error codes. P1389...no asd relay output voltage at pcm. P1388...auto shutdown relay control circuit. And P1282...fuel pump relay control circuit. Ive replaced the relays....in English does this meen I have bad wires in both circuits or is my pcm fried and in need of replacing? Can someone translate what thoes codes meen?