Kansas City bs Thread
10-17-2012, 04:04 PM
#2131
Senior Member
Join Date: Nov 2011
Location: Manhattan, Kansas
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Originally Posted by Vendi
Thanks for the welcome! I live in the 435 and Gregory Blvd area. I just don't have the finances to do any modding right now. That's why I was wondering if anyone had some spare parts left over from a mod that could get me by. The people who owned the Jeep before me neglected and beat it up pretty good. Since my truck transmission went out it is my daily driver. I am just wanting to get it straightened out for now and be able to have fun with it ( get a little mud on it!), get a feel for off road a bit. In the spring when taxes come in, i will likely do a modest lift and tinker with it more as far as mods.
This thing needs serious attention. The front drive shaft is off from the previous owner. They said it had a bad vibration. Once I get it back on I can see what i am dealing with.I went down to pick and pull, but there were no XJs, but alot of Grands. one step at a time....
This thing needs serious attention. The front drive shaft is off from the previous owner. They said it had a bad vibration. Once I get it back on I can see what i am dealing with.I went down to pick and pull, but there were no XJs, but alot of Grands. one step at a time....
don't go too modest. I started with 3" but it wasn't enough so I went 4.5". Could have saved money in the long run if I had gone 4.5" from the beginning.. just keep everything you might want in mind... like long arms
10-17-2012, 08:58 PM
#2132
Senior Member
Join Date: Jan 2012
Location: Kansas City
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
I have stock upper and lower control arms sitting in my garage taking up space. You can just have them. Mine are for a 98, so might double check to make sure they fit but they shouldn't be any different.
10-17-2012, 09:11 PM
#2133
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Raymore, Mo
Posts: 2,857
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Vendi welcome to the forum and look forward to meetin sometime and doing some wheeling. I believe I have stock lower control arms off my 95 still at home. I will check tonight. I would also just give them to you
10-17-2012, 11:12 PM
#2135
Junior Member
Join Date: Oct 2012
Location: Kansas City
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 6 cyl
Thanks, I really appreciate the help! According to Autozone, the part numbers for control arms on a 91 and 98 are the same. Zimdogg, if you have a set, could I meet you some time Saturday to get them from you? I need to get out to pick and pull to see if I can find a couple of other things I need.
10-17-2012, 11:25 PM
#2136
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Raymore, Mo
Posts: 2,857
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by straightsixjeep
Not going to chance driving down to wheel this weekend, throw out bearing is starting to go out. Take pics!
10-17-2012, 11:25 PM
#2137
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Raymore, Mo
Posts: 2,857
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by Vendi
Thanks, I really appreciate the help! According to Autozone, the part numbers for control arms on a 91 and 98 are the same. Zimdogg, if you have a set, could I meet you some time Saturday to get them from you? I need to get out to pick and pull to see if I can find a couple of other things I need.
10-17-2012, 11:56 PM
#2138
CF Veteran
Join Date: Aug 2012
Location: ks
Posts: 1,539
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I want to and I appreciate the offer but Im hoping to tear into it this weekend. Its bugging me, been trying to baby it since I bought it since I dont know if its the original clutch or not. Its getting harder to shift and it started squeeling when stopped, but if I press the clutch in it goes away. And was almost lifted and ready to wheel.
10-18-2012, 06:05 AM
#2139
Junior Member
Join Date: Oct 2012
Location: Kansas City
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 6 cyl
When the previous owner disconnected the drive shaft, they weren't very careful about keeping track of the u-joint straps. one is missing and I was going to go see if one from a grand cherokee is the same as mine. then I can hook the shaft back up and see what it is doing, then I'll have an idea where to go next.
10-18-2012, 08:00 AM
#2140
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Raymore, Mo
Posts: 2,857
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by straightsixjeep
I want to and I appreciate the offer but Im hoping to tear into it this weekend. Its bugging me, been trying to baby it since I bought it since I dont know if its the original clutch or not. Its getting harder to shift and it started squeeling when stopped, but if I press the clutch in it goes away. And was almost lifted and ready to wheel.
10-18-2012, 08:58 AM
#2141
Senior Member
Join Date: Jan 2012
Location: Kansas City
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Yeah I can meet somewhere Saturday. I live up north. Do you need the uppers or lowers? As an fyi I had to cut the bolt on one of my lowers so that bushing will need to be replaced. Probably best to replace the bushings either way as that's probably part of the reason for your death wobble. These came off my jeep with 168k miles.
Also check ball joints, tie rod ends, track bar and all bushings related to those components to get rid of the wobble.
Also check ball joints, tie rod ends, track bar and all bushings related to those components to get rid of the wobble.
10-18-2012, 11:47 AM
#2142
Junior Member
Join Date: Oct 2012
Location: Kansas City
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 6 cyl
I need an upper and lower for the passenger side. it looks like someone hit something and bent them a bit. I'll PM you and we can set a time/place. Thanks again!
