Northern Utah BS thread
CF Veteran
Joined: Aug 2009
Posts: 1,535
Likes: 0
From: Eagle Mountain, Utah
Year: 1994
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Sep 2010
Posts: 1,649
Likes: 1
From: Springville, UT
Year: 1993
Model: Grand Cherokee
Engine: 5.2 V8, Dual cold air, dual batts, E-fan, Sanden OBA
so theres a run going on saturday?? i wanna hit lil moab so bad!
dpace7x7, ya putting them axles in is gonna be a lot of work- but if you have a decent welder, some time, and some know how you can do it- i dont advise 37's on stock axles tho...definitly not without chromos
but where you from?? i would gladly help you out with getting those axles ready to drop into your jeep if you get some
The winch install looks slick jeff, now we will have to test the winch out on the trail to make sure it works
dpace7x7, ya putting them axles in is gonna be a lot of work- but if you have a decent welder, some time, and some know how you can do it- i dont advise 37's on stock axles tho...definitly not without chromos
but where you from?? i would gladly help you out with getting those axles ready to drop into your jeep if you get some
The winch install looks slick jeff, now we will have to test the winch out on the trail to make sure it works
Senior Member
Joined: Jun 2010
Posts: 689
Likes: 2
From: Payson, UT
Year: 1993
Model: Cherokee
Engine: 4.7L I6
so theres a run going on saturday?? i wanna hit lil moab so bad!
dpace7x7, ya putting them axles in is gonna be a lot of work- but if you have a decent welder, some time, and some know how you can do it- i dont advise 37's on stock axles tho...definitly not without chromos
but where you from?? i would gladly help you out with getting those axles ready to drop into your jeep if you get some
The winch install looks slick jeff, now we will have to test the winch out on the trail to make sure it works
dpace7x7, ya putting them axles in is gonna be a lot of work- but if you have a decent welder, some time, and some know how you can do it- i dont advise 37's on stock axles tho...definitly not without chromos
but where you from?? i would gladly help you out with getting those axles ready to drop into your jeep if you get some
The winch install looks slick jeff, now we will have to test the winch out on the trail to make sure it works
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
Ya ur best bet is to go with a crystler 8.25 29 spline rear & upgrade to chromolley shafts all the way around! Unless you can find a D40 rear... Few & far between
Last edited by builtnotbought89'; Nov 1, 2010 at 09:53 PM.
Senior Member
Joined: Oct 2009
Posts: 859
Likes: 0
From: Hyrum,UT
Year: 2001
Model: Cherokee
Engine: 1-6 4.0
CF Veteran
Joined: Aug 2010
Posts: 1,326
Likes: 0
From: Huricane, Utah
Year: 1994 Ford Bronco
Model: Cherokee
Engine: 351 W
Well i'm calling a club meeting this week mandatory, for Jeff,Ryan,Zach P,Mike, Sean there has been alot of issue's brought to my attention the past couple week's we wll solve them! Any names above figure out what date work's best for ya guy's after 6 is best for me. I NEED AT LEAST 3 OF 4 OF THE BOARD OF DIRECTOR'S TO BE THERE.call or text me when you guys can figure out a date this needs to be done before our run on saturday.
Thank's Tom.
Thank's Tom.
Senior Member
Joined: Jun 2010
Posts: 689
Likes: 2
From: Payson, UT
Year: 1993
Model: Cherokee
Engine: 4.7L I6
Vote for my XJ on AnythingLifted.com's Rig of the month! http://www.anythinglifted.com/forums.html
Right hand side of the page, dpace7. Thanks!
Right hand side of the page, dpace7. Thanks!