Northern Utah BS thread
CF Veteran
Joined: Jan 2009
Posts: 1,703
Likes: 0
From: Utardiland
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
)
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
I got my rear springs on today, looks good IMO, pretty good height (will settle 1/2" hopefully) even if it doesn't my "frame" hieght will still be leagal with 37" tires 
when that happens LOL I also got my weld on shims installed and it fixed my drive-line vibration problems around 55-70MPH. Yay!
Anyone interested in some 3.5" RE rear leaf springs? 60$ bushings have a little wear but never made a noise or had a problem on mine. AAA spring quoted 70$ to install new bushings (includes bushing cost) If you so feel the need. so for roughly 130$ you could have 2 RE leaf springs.
when that happens LOL I also got my weld on shims installed and it fixed my drive-line vibration problems around 55-70MPH. Yay!Anyone interested in some 3.5" RE rear leaf springs? 60$ bushings have a little wear but never made a noise or had a problem on mine. AAA spring quoted 70$ to install new bushings (includes bushing cost) If you so feel the need. so for roughly 130$ you could have 2 RE leaf springs.
Last edited by Gorillaxj; Jun 4, 2012 at 09:05 PM.
Thread Starter
CF Veteran
Joined: Sep 2009
Posts: 3,612
Likes: 0
From: West Valley
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
I got my rear springs on today, looks good IMO, pretty good height (will settle 1/2" hopefully) even if it doesn't my "frame" hieght will still be leagal with 37" tires when that happens LOL I also got my weld on shims installed and it fixed my drive-line vibration problems around 55-70MPH. Yay!
Anyone interested in some 3.5" RE rear leaf springs? 60$ bushings have a little wear but never made a noise or had a problem on mine. AAA spring quoted 70$ to install new bushings (includes bushing cost) If you so feel the need. so for roughly 130$ you could have 2 RE leaf springs.
when that happens LOL I also got my weld on shims installed and it fixed my drive-line vibration problems around 55-70MPH. Yay!Anyone interested in some 3.5" RE rear leaf springs? 60$ bushings have a little wear but never made a noise or had a problem on mine. AAA spring quoted 70$ to install new bushings (includes bushing cost) If you so feel the need. so for roughly 130$ you could have 2 RE leaf springs.
I'll be here patiently waiting for your brakeline update.
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
So the new ones are made... I have them in hand... but they weren't very intelligent and made them without the banjo fitting and put a 3an fitting on the axle end... So I had to Order then 3an-banjo fittings... then they will go on.
I should get them on before I go to Seattle... parts should be here on the 8th... so 9th-10, lame sauce! lol
Thread Starter
CF Veteran
Joined: Sep 2009
Posts: 3,612
Likes: 0
From: West Valley
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
haha, yeah not to bad
So the new ones are made... I have them in hand... but they weren't very intelligent and made them without the banjo fitting and put a 3an fitting on the axle end... So I had to Order then 3an-banjo fittings... then they will go on. I should get them on before I go to Seattle... parts should be here on the 8th... so 9th-10, lame sauce! lol
So the new ones are made... I have them in hand... but they weren't very intelligent and made them without the banjo fitting and put a 3an fitting on the axle end... So I had to Order then 3an-banjo fittings... then they will go on.
I should get them on before I go to Seattle... parts should be here on the 8th... so 9th-10, lame sauce! lol
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
No worries, like I stated, patiently waiting, Lol. Parts for my long arms are scheduled for delivery on the 11th (and I still have to buy steel) and the Bushwackers arent slated to ship til the 26th, I've got time, too much time, Lol. My goals to have the beast ready for October. That being said, I'm just bustin your ***** for the sake of it, Lol!
Your going to love the nice soft ride of long arms and shackle relocation brackets. you rig is getting mean! I love how mine rides for what it is.
Thread Starter
CF Veteran
Joined: Sep 2009
Posts: 3,612
Likes: 0
From: West Valley
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
CF Veteran
Joined: Sep 2010
Posts: 1,930
Likes: 0
From: herriman
Year: 1991
Model: Cherokee
Engine: 4.0
