Banned
Quote:
Nice, now add one of these when you bend yours lol
http://www.summitracing.com/parts/WRN-73850
Are they aluminum ? If so problem because I have no room to bolt it upOriginally Posted by Gorillaxj
Nice, now add one of these when you bend yours lol
http://www.summitracing.com/parts/WRN-73850
CF Veteran
Quote:
Nope, its cast iron IIRC. it bolts in the same spot and same way your fair-lead is bolted. if you can fit that one you can fit this one Originally Posted by Tobyxj
Are they aluminum ? If so problem because I have no room to bolt it up
. But either will work and some Love the roller, I just like this style wont bend and bind liek a roller, and how its more out of the way...
CF Veteran
Quote:
Nope, its cast iron IIRC. it bolts in the same spot and same way your fair-lead is bolted. if you can fit that one you can fit this one . But either will work and some Love the roller, I just like this style wont bend and bind liek a roller, and how its more out of the way...
I need to buy one.Originally Posted by Gorillaxj
Nope, its cast iron IIRC. it bolts in the same spot and same way your fair-lead is bolted. if you can fit that one you can fit this one
. But either will work and some Love the roller, I just like this style wont bend and bind liek a roller, and how its more out of the way...
Banned
Quote:
Nope, its cast iron IIRC. it bolts in the same spot and same way your fair-lead is bolted. if you can fit that one you can fit this one . But either will work and some Love the roller, I just like this style wont bend and bind liek a roller, and how its more out of the way...
I had to weld it not enough clearance between winch and bumper Originally Posted by Gorillaxj
Nope, its cast iron IIRC. it bolts in the same spot and same way your fair-lead is bolted. if you can fit that one you can fit this one
. But either will work and some Love the roller, I just like this style wont bend and bind liek a roller, and how its more out of the way...
I'll grind off when I get the new one
It's not going to stick out at all lol
CF Veteran
Quote:
i need to buy a winch lawl omg lol roflmaoOriginally Posted by dev_daddy
I need to buy one.
CF Veteran
Quote:
I'll grind off when I get the new one
It's not going to stick out at all lol
Oh I see! no room for a bolt head on the back side? could weld the bolt in to make it like a stud and slide the fair-lead on and tighten the nuts... Obviously don't know the room just an idea.Originally Posted by Tobyxj
I had to weld it not enough clearance between winch and bumper I'll grind off when I get the new one
It's not going to stick out at all lol
Banned
Quote:
Oh I see! no room for a bolt head on the back side? could weld the bolt in to make it like a stud and slide the fair-lead on and tighten the nuts... Obviously don't know the room just an idea.
Yes 0 room I did drill hole to all line up but winch is right up against the front plate but good idea with the nut thats what I'm going to do thanksOriginally Posted by Gorillaxj
Oh I see! no room for a bolt head on the back side? could weld the bolt in to make it like a stud and slide the fair-lead on and tighten the nuts... Obviously don't know the room just an idea.
CF Veteran
Quote:
Oh I see! no room for a bolt head on the back side? could weld the bolt in to make it like a stud and slide the fair-lead on and tighten the nuts... Obviously don't know the room just an idea.
This is what I did with mineOriginally Posted by Gorillaxj
Oh I see! no room for a bolt head on the back side? could weld the bolt in to make it like a stud and slide the fair-lead on and tighten the nuts... Obviously don't know the room just an idea.
Junior Member
I got heartburn looking at that 
