Yea there was one in front of the house the other day when I was comming home was a roll over in the middle of the road both lanes southbound and northbound were blocked off pretty. Maybe a min soon and I would of seen or been in it too was crazy.
If your not afraid to cut you'll do fine just follow the line and sand accordingly. Lay some painter tape where you wanna cut put your template if you made one, stand back and have someone else move them into position, center them out trace outline etc and pilot hole a 1/4 to 3/8 in each corner then cut away, the tape will help in not letting the paint chip as badly so it clean. Jigsaw or bodysaw with fine blade works the best. Or dermel if you wish. I did mine with bodysaw and cutoff wheel.
CF Veteran
Quote:
Oh im not scared to cut, just wanna make sure I do it cleanly. Ill do mine with my dremel easiest the handle and cuts like butter. And as far as putting them in the right spot, ill measure from ever directionOriginally Posted by hbracing13
If your not afraid to cut you'll do fine just follow the line and sand accordingly. Lay some painter tape where you wanna cut put your template if you made one, stand back and have someone else move them into position, center them out trace outline etc and pilot hole a 1/4 to 3/8 in each corner then cut away, the tape will help in not letting the paint chip as badly so it clean. Jigsaw or bodysaw with fine blade works the best. Or dermel if you wish. I did mine with bodysaw and cutoff wheel.
Senior Member
The open or louvered vents are supposed to be more efficient and better at displacing heat at low speeds and at high speeds on highway. At high speeds the scooped vents force air into the engine compartment.
CF Veteran
Quote:
Yup, if I was gonna run scoop I would want it setup to my intake for real cold airOriginally Posted by Monster3663
The open or louvered vents are supposed to be more efficient and better at displacing heat at low speeds and at high speeds on highway. At high speeds the scooped vents force air into the engine compartment.
Quote:
Oh im not scared to cut, just wanna make sure I do it cleanly. Ill do mine with my dremel easiest the handle and cuts like butter. And as far as putting them in the right spot, ill measure from ever direction
Yea but how much do you spend on the cut off wheels? Cleanly won't matter since you'll leave about a 1/8 to 1/4 lip for it to sit on so you won't even see it a screw up if it happens.Originally Posted by PurpleToxin505
Oh im not scared to cut, just wanna make sure I do it cleanly. Ill do mine with my dremel easiest the handle and cuts like butter. And as far as putting them in the right spot, ill measure from ever direction
CF Veteran
Quote:
Yea but how much do you spend on the cut off wheels? Cleanly won't matter since you'll leave about a 1/8 to 1/4 lip for it to sit on so you won't even see it a screw up if it happens.
Like 15 for 20 of them, I still have a pack from when I was gonna trim my bumper. And mine will be like monsters, mounted from the bottom so it HAS to be cleanOriginally Posted by hbracing13
Yea but how much do you spend on the cut off wheels? Cleanly won't matter since you'll leave about a 1/8 to 1/4 lip for it to sit on so you won't even see it a screw up if it happens.
CF Veteran
Alright fellas bad news has begun.
Jeep is officially for sale no and ifs or butts about it.
First 2500 bucks cash takes it.
Please spread the word
Jeep is officially for sale no and ifs or butts about it.
First 2500 bucks cash takes it.
Please spread the word
CF Veteran
Quote:
Jeep is officially for sale no and ifs or butts about it.
First 2500 bucks cash takes it.
Please spread the word
You have a cl add? Ill share it on fbOriginally Posted by alfreado121
Alright fellas bad news has begun.Jeep is officially for sale no and ifs or butts about it.
First 2500 bucks cash takes it.
Please spread the word
CF Veteran
Quote:
Yeah it's on cl. Idk how to share that on hereOriginally Posted by PurpleToxin505
You have a cl add? Ill share it on fb
CF Veteran
Quote:
the one priced for 3900? just copy the link and paste it on hereOriginally Posted by alfreado121
Yeah it's on cl. Idk how to share that on here
Senior Member
i want this... bad *** then wouldnt have to do my chop lol
http://albuquerque.craigslist.org/cto/4289671158.html
http://albuquerque.craigslist.org/cto/4289671158.html
CF Veteran
Quote:
http://albuquerque.craigslist.org/cto/4289671158.html
Im pretty sure someone in my neighborhood has one, pretty clean. Not sure if its the j10, but its a jeep with a truck bed lol,Originally Posted by T-Rexj
i want this... bad *** then wouldnt have to do my chop lolhttp://albuquerque.craigslist.org/cto/4289671158.html