Juniors the best
Hay!!!!!!!! We do 40/60 punk! I bring the burritos!!

 

I got lots of stuff coming in the mail I pretty confident I can do most of it but if I run into problems I know everyone on here will gladly help out

 

You got a drill bit 25/32?

 

Ya me too. Did you get a SYE or hack n tap? I'm worried about the SYE install too not bad but it's new territory. Are you gonna take it out or leave it in and do it?

 

I got the SYE also

I'm not sure if I'm going to take it out fully or leave it in I guess depends on if I can get to it with it in with the tools I got

 

I should have a drill bit that size? Why?

 

That's the size you need to drill the unibody too, so they sandwich the support with the body and the cross member together

 

And its not a common size and but you can do it with a step drill bit just you gotta make sure its snug or go with, 13/16 and drill the brackets bigger.

 

Ok I got it. My grandpa gots a bunch of stuff so I can borrow it from him maybe

 

Do you know how to set gears as well? I talked to 4 Wheel Parts and the gave me a rough quote of $1000 for front and rear axles just for labor. I told them I already had the gears and master install kits.

 

Iv only done the rear end on a mustang a couple of times settin backlash and what not isn't as complicated as it seems but you got to have tools for it.
Watch some YouTube videos they got everything on there

 

I've done them before but long time ago I got a buddy that does them at work, im going to have him help me with mine. I have my old books that tell you how to set everything

 

That sounds good! One day ill be doing gears once I save and get 35's and lockers

 

What size tires are you running now? And I just got 35's for this lift I just need to figure what I'm doing for gears here soon. And I looked at some videos and ya if only I had a full service shop. I mean they were pressing bearings and had a lift and inch-lb wrenches. The works. Someday... It looks like it'd cost just as much to have it installed as buy all the proper quality tools. Decisions, decisions.

 

Don't you have 33 now? So you going to long arm sye and 3.07 gears I think your motor is going to hate you