Jrock(fos)

Hmmmmm

hbracing13

But ye I could help you do them so you know what your doin if ever you wanted to do them

Jrock(fos)

I do want to do them! Let me know when and we can get together to do it! What tools will we need? Someone told me I need a torque wrench?

hbracing13

You need axle seals right and not the pinion seal. If axle seal you don't. Pinion seal you'll have too but if seen the? Done without and had no problem

NMCherokeePilot

Does anyone have pilot automotive strobes on their rig?

hbracing13

No but have really tempted to buy them but I wanna see how bright that really would be. I was just goin to make my own my cuz know how but haven't gotten that far yet

NMCherokeePilot

I bought some from autozone yesterday and i can get them to work

crux

Can not say that I have any experience with pilot automotive lighting. Ended up with some CREE LEDs that are bright enough "to replace most headlamps". Custom cut a 6061 alloy housing on the lathe soaking up heat.

Link is here for the board, LEDs & optics: http://www.cutter.com.au/proddetail.php?prod=cut890


Currently fabricating a side roof mount for the light better seeing the trail at night or for when the side tarp tent is up and out in the backcountry.

NMCherokeePilot

I jist can get these lights to work. Ive tried a diffrent power source and ground. For what ever reason they wont work for me

crux

Sorry to hear it. Sounds like it is time to trouble shoot the lights or return them as defective.

NMCherokeePilot

I think im going to return them

hbracing13

Anyone need h4 headlight I found another set and upull there plastic housing and lense they need to be cleaned but that easy to do

lonewolf53

i dont need em but those headlights you gave me are so clean and bright thanks man

hbracing13

No prob man. Did you ever end up upgrading your harness since you had everything off already

zwhiz

like a strobe thats meant for an airplane? are you sure they are 12 volt? are the stobes wired up to a strobe power supply to give them the pulse?