Four Corners BS thread!!

Subscribe
Jul 19, 2010 | 02:06 PM
  #961  
Quote: Except he made it through, and I backed out!! LOL!!
get scared there little fella?
Reply 0
Jul 19, 2010 | 03:10 PM
  #962  
He tried. I didn't. Then you have the chinakee that just drove over it lol. Crazy guy.
Reply 0
Jul 19, 2010 | 03:32 PM
  #963  
Quote: get scared there little fella?
Nope, I was binding up on the underside of my rig, and it was kicking the rear end to the right. I think it may have been hitting my x-member or something, because it would get to a certain point, and bind up, and kick my tail around, so I just backed off. As I've said before, I don't have anything to prove to anyone...

Alex, I wouldn't say he drove right over it, he had a couple issues with his CA brackets getting snagged up, but he did get over it!!
Reply 0
Jul 19, 2010 | 04:50 PM
  #964  
Yeah he did. His CA brackets hang too low.

Still, we need to get LAs Kyle!!!!!!!
Reply 0
Jul 19, 2010 | 05:17 PM
  #965  
No doubt bro!!
Reply 0
Jul 19, 2010 | 05:34 PM
  #966  
Quote: As I've said before, I don't have anything to prove to anyone...

Alex, I wouldn't say he drove right over it, he had a couple issues with his CA brackets getting snagged up, but he did get over it!!
thats what i like about you homie!

Quote: Yeah he did. His CA brackets hang too low.

Still, we need to get LAs Kyle!!!!!!!
he should rebuild off the frame is his unibody boxed on all three sides? if he did that it would be alot better for clearance. is his 4 link ran with a track bar as well?

i wanna run this trail and hit that line!!!
Reply 0
Jul 20, 2010 | 12:08 AM
  #967  
Quote: he should rebuild off the frame is his unibody boxed on all three sides? if he did that it would be alot better for clearance. is his 4 link ran with a track bar as well?

i wanna run this trail and hit that line!!!
I'm not sure how the unibody is set up. His rear link is triangulated. It flexes mad crazy. And he just went to 39.5s today on a D30 lol.
Reply 0
Jul 20, 2010 | 10:27 AM
  #968  
Quote: I'm not sure how the unibody is set up. His rear link is triangulated. It flexes mad crazy. And he just went to 39.5s today on a D30 lol.
wow is his front axle trussed? if not he will want too. all i really gotta say is KABOOM!!!
Reply 0
Jul 20, 2010 | 12:42 PM
  #969  
Quote: wow is his front axle trussed? if not he will want too. all i really gotta say is KABOOM!!!
Lol.. We were talking about that yesterday. He's trussing it this week, but he kinda wants it to go kaboom so he can build a 60. The only thing that's saved the lil 30 so far is being open and a light foot, but 39's is just asking for it.
Reply 0
Jul 20, 2010 | 01:16 PM
  #970  
Did he R/R his unit bearing??
Reply 0
Jul 20, 2010 | 02:42 PM
  #971  
Quote: Did he R/R his unit bearing??
Yeah. We did it last week. We also found out the hard way there are 2 or more different hubs?

I had a spare axle that was bent from my bro's '99. I gave Danny a hub. We put it on, but when we went to but his tire on, it would not spin. Found out the rotor was caught onto the hub. Had to break the rotor off, and found out the hubs were a little different.

Called a few auto parts stores and they all kept saying it was same parts, but they were clearly different. He had to go to the JY and pulled some hubs off a '93 I think. His is a '92.
Reply 0
Jul 20, 2010 | 02:57 PM
  #972  
Good, that thing was SHOT!! LOL!!
Reply 0
Jul 26, 2010 | 09:15 AM
  #973  
Mornin Corners!! How we doin today??
Reply 0
Jul 26, 2010 | 10:21 AM
  #974  
I'm back to work and not enjoying it.
Reply 0
Jul 26, 2010 | 10:35 AM
  #975  
great today ran two trails this weekend no pics at all. haha XJBONES and I are talkin already about running eagle rock this saturday. HINT HINT nudge nudge kylie!!!
Reply 0