It will hit your steering stablizer mount, track bar mount and possibly your diff cover if you have an aftermarket unit. You need to run a custom OTK track bar and brkts or use offset TRE's on the drag link.

Just ask Dogger or Digger.......

But to answer your question, yes. Look at my face book page for how I run it.

 

Can i has the super swamps?!?!

 

Would I be best of to just do a hd DOM tie rod replacement and run it OTK on the drivers side

 

What all are u gonna change on it besides camo paint!?!?!?

 

Dustin's steering is probably the easiest way to get it done. I used ruffstuffs panhard kit (minus the frame side bracket) since you need to go OTA with it, then D hooked up the drag link/tie rod. All heims and tough as nails.

If you want to go OTK with it, you'll have to make sure your clearance is perfect.

 

Also make sure your wheels are off set enough or will need some wheel spacers. That's what we ran into on mine.

 

This if you use offset TREs^^^^^^

 

And what would they go on?...they are 39.5 inches tall........

 

You will have to wait for updates!!

 

Your a bad person !!!!! Bahahaha but will do bro

 

I just want them haha. I wouldn't put em on anything...im a bit of a tire *****...and a gear *****...

 

Anybody interested in some 703s and a bored throttle body??? The TB won't work on my new jeep

 

price?

 

TB $40
703s $35

The injectors were cleaned with all new parts and orings, only had em in the jeep for a couple months.

If you want the TB, just make sure your MAP is on the firewall. Also only used for a couple months, installed em both at the same time.

 

I would like the injectors. Where are you located?
What year is the TB for?