The_ocho

If you go that height you are going to need a lot lol you're gonna be close to 6 inches

JD Cravin

my rheumatoid arthritis is kicking my *** this morning probably not going to be able to bring all my guns

I'll be lucky to make it wheeling this morning, it's that bad

Photojared

What are you putting in the rear?

The_ocho

Hope you can make it out man!


Also I may be a min late depending on if I have to stop for gAs before then

The_ocho

I'm here

93jeeplv

Well i got a whole 3 inch lift for the front with shocks lca etc. Just debating on leaving my spacers on or not. Might just leave the spacers out for right now until i can get more parts. I already plan on putting extended brake lines on all around

93jeeplv

Im gona make a bastard pack if i dont by zr's lift leafs with the leaf springs you gave me a long time ago.

Gatchmo5710

Hey guys a lot of guys are going to sand hollow in st George on Easter weekend. Feel free to join us. I will be leading a group Saturday morning around 9. Any questions pm me.

SlyXJ

Why do I keep breaking my DS I need help guys this is the third one in 3 weeks

88XJSteve

What are the specs of your jeep? What kind of lift, tires etc etc

SlyXJ

Really don't know much more than 4 inch lift with 33s I just got it like 2-3 months ago every one is telling me its the pinion angle

The_ocho

Anything above 4 inches which is what you are going to get with that 3" kit will require, Drop pitman arm, Adjustable track bar, control arms, and good steering thats not worn out. IF you want to go that high buy a kit so you get everything. tossing 2 in spacers on a 3 in lift is going to be harder than you think

what exactly are you breaking on your shaft? U joints, yokes, the shaft its self? we need info. get me that info and a picture of your pinon angle and I will tell you wahts wrong

SlyXJ

Well really what happends is the straps break off which causes the yoke to break which causes the shaft to crack where the u joint goes in

SlyXJ

And how do I take a pic if the shaft is out do you want a pic of it missing idk if you would be able to tell but whatever kind of pic you want ill take I appreciate all the help guys

The_ocho

Just get me a pic of the pinon from the side. I wanna see the angle I dont need the shaft in there. are you running a SYE with double cardan shaft or just regular shaft? It sounds to me like your U joints are out of phase and ripping themselves apart.