When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yeah a friend of mine had a 96 on a 4.5" lift with a 8.8 we swapped in. Knew I had to have a box on wheels eventually so when this one showed up on CL I had to get it. Once I got the Champlain brand (yes that really says Champlain) CPS out of it it runs awesome!
Tried to use the HF DA sander I got today. Even at 4cfm my compressor cant keep up demand for the tool. looks like I need to get some 240V for the garage happening...
Passed smog today but didn't get time to go le department of motor vehicles. However I did manage to install the $10 Ebay cupholder I got 2 weeks ago. I also managed to desolder the polarity diode on my cb to verify it still works so diodes are on order. Also eyeing a 3" lift on a couple of websites.
That cup holder seems useful but I wouldn’t get one because I use my handbrake for mad skids in dirt and also for general Offroad use like going up a steep hill
Oh btw keep an eye out for me in the valley! If you see me say hi! (also she isn’t muddy anymore)
If I see you ill definitely say hello! Probably wont be driving the jeep until I get around to fixing the AC, With the constant triple digit temps when I get off of work I just daily the FRS. Nice stubby bumper, is it an aftermarket unit? Connected to the frame? (really asking can it support a winch Also the cup holder was a $10 trial, maybe it works if you have a slushbox but with a manual id just knock over anything bigger than a soda can.
This Sunday in Rialto.
Inland Jeep is doing their Jeep Expo this Sunday.
I know a bunch of XJ peeps will be out there for it. Not to mention Shawn is a BIG Xj person.
Also the cup holder was a $10 trial, maybe it works if you have a slushbox but with a manual id just knock over anything bigger than a soda can.
