anyone from Nor*Cal?
CF Veteran
Joined: Aug 2008
Posts: 6,588
Likes: 495
From: Chico, CA
Year: 1986
Model: Cherokee
Engine: 4.3L with headers and full 3" exhaust system
There is a group of about seven of us give or take on several forums in the Chico area. I will be going wheeling on Sunday if you are up for it. I will start in Red Bluff and end up in Chico. There are several trails up Hogsback that are not too difficult. You are welcome to come if you want.
Member
Joined: Sep 2009
Posts: 135
Likes: 0
From: Fresno CA
Year: 1988
Model: Cherokee
Engine: 4.0 (74,000miles)
[QUOTE=di@bolik;541020]Whassup everyone, Sac area here-


DUDE. I have just seen where my XJ is going!
That setup is BAAAAAADDD!
Check out mine. Tell me if I am dreaming


DUDE. I have just seen where my XJ is going!
That setup is BAAAAAADDD!
Check out mine. Tell me if I am dreaming
Junior Member
Joined: May 2010
Posts: 53
Likes: 0
From: fair oaks, ca
Year: 1996
Model: Cherokee
Engine: 4.0
only about half ofthe 4x4 area is closed right now i believe. i was out there for a rally x a week ago. and they had the mud pits and frame twister still open. but they may have closed the rest of it since i was there.
Junior Member
Joined: Dec 2009
Posts: 76
Likes: 0
From: Lake county Ca and Sac
Year: 1990
Model: Cherokee
Engine: 4.0
There is a group of about seven of us give or take on several forums in the Chico area. I will be going wheeling on Sunday if you are up for it. I will start in Red Bluff and end up in Chico. There are several trails up Hogsback that are not too difficult. You are welcome to come if you want.
[QUOTE=Wheeler-man;553174]
No, yours looks great! Mine has lots of mods, but without that, you can basically do the same cosmetically with mostly bolt-on stuff. My 'mantra' when rebuilding was that I wanted a vehicle which was 'Anti-Bling', so I stripped all chrome & went from there.
The tail lights currently on my rig were a mistake. During the rebuild I ordered black, and received clear.. Due to timing, I had to install the new tails because I had to drive the rig to a shop for Rhino-lining treatment. I'm about to replace them with black-steel boxes & LED Tails.
No, yours looks great! Mine has lots of mods, but without that, you can basically do the same cosmetically with mostly bolt-on stuff. My 'mantra' when rebuilding was that I wanted a vehicle which was 'Anti-Bling', so I stripped all chrome & went from there.
The tail lights currently on my rig were a mistake. During the rebuild I ordered black, and received clear.. Due to timing, I had to install the new tails because I had to drive the rig to a shop for Rhino-lining treatment. I'm about to replace them with black-steel boxes & LED Tails.
Junior Member
Joined: May 2010
Posts: 53
Likes: 0
From: fair oaks, ca
Year: 1996
Model: Cherokee
Engine: 4.0
oh, btw i was at prairie city today and they only have a small section closed off. there is enough room to crawl around and get dirty. well worth the 5 bucks!!!!
Junior Member
Joined: Feb 2010
Posts: 94
Likes: 1
From: Ukiah, ca
Year: 1992
Model: Cherokee
Engine: I6 4.0 HO
next time ill get my wife or little bro to take pics... trying to get my step dad to help me make a corse up there to do some test runs and maybe a mudpit =D
Junior Member
Joined: Dec 2009
Posts: 76
Likes: 0
From: Lake county Ca and Sac
Year: 1990
Model: Cherokee
Engine: 4.0






