But then mine won't be the little Jeep that could!

 

A little boost always helps. :P

 

Well I wired my reverse light switch, getting good power and ground because the LED on the switch comes on, but it doesn't turn on the lights. I wired it to the Reverse light wire going to the relay.

Also, my trans temp gauge seems to be working, magically , but a little issue. I stole power from the 12V switched wire from the radio [which works exactly as it should], but the trans temp gauge power plug is getting full-time power. Any ideas?

Anyway, pics

 

Washed and shined it up, cleaned the interior up and cleaned out a bunch of junk. Also cleaned the engine bay up a little bit.

Before


After

 

Let me know how that one works for you. I was looking at it too.

 

Sorry, ment this for above post?

 

You must have wired it to the wrong wire. there is a constant and a switched to the radio. If there is power to the gauge when the ignition is off. You have the constant. Use your voltmeter, check if theres 12 at it when key is on or off or all the time.

 

I power washed my jeep today after some wheeling I did on Sunday

 

work was slow swithed out a lacerated high pressure line for the steering. no air box = angles for days!

 

So far so good. Mounting was simple, took it up on some forest roads today and just pulled it up a slight hill worked good, then there was a fallen tree on one of the trails so I pulled the tree off the road with it and had no problems.

 

Gah that would suck because I soldered it in. Oh well, I'll check it. Any idea on why the reverse light aux switch doesn't work? Power to the switch, but it doesn't turn the lights on.

 

Fried a fuel pump.. And towed her home with the ford

 

No you pushed a Ford Home with a really stiff rope.

 

LMAO!

 

I have one of those for sale=D 55$ shipped.