Pacific Northwest Washington, Oregon, Alaska

Walker Valley March 17th

Thread Tools
 
Search this Thread
 
Old Mar 11, 2012 | 08:06 PM
  #16  
Mopar94's Avatar
Junior Member
 
Joined: Dec 2011
Posts: 57
Likes: 0
Default

Hey, Im new to Wa and would like to tag along. But not sure the trail requirements. Any info?
I have a 94 XJ with 3" lift setting on 31s. Nothing special but its just starting.
Reply
Old Mar 11, 2012 | 10:08 PM
  #17  
assetts91's Avatar
Thread Starter
CF Veteran
 
Joined: Mar 2011
Posts: 1,842
Likes: 0
From: Woodinville, Bothell and Marysville Washington
Year: 2000
Model: Cherokee
Engine: I6 4.0
Default

Originally Posted by Mopar94
Hey, Im new to Wa and would like to tag along. But not sure the trail requirements. Any info?
I have a 94 XJ with 3" lift setting on 31s. Nothing special but its just starting.
Your diffs might scrape, but no big deal really. Take it easy and slow and you'll be good. There are no specific requirements on the trails. You just have to be ready for everything AND trees. I had a passenger, but he might not be able
to make it because of pneumonia. If you want to check it out before you bring your rig out(unless you don't mind a few dents) you can ride shotty with me. Pm or text me, my # is in the first post
Reply
Old Mar 11, 2012 | 10:18 PM
  #18  
1987XJ's Avatar
Senior Member
 
Joined: Nov 2008
Posts: 510
Likes: 0
From: Oak Harbor, Wa
Year: 1987
Model: Cherokee
Engine: 4.0 Renix
Default

Originally Posted by Mopar94
Hey, Im new to Wa and would like to tag along. But not sure the trail requirements. Any info?
I have a 94 XJ with 3" lift setting on 31s. Nothing special but its just starting.
You'll be fine, I took my Cherokee to walker when I had a 3" and didn't do too bad.
Reply
Old Mar 12, 2012 | 12:59 AM
  #19  
Ellefsonb's Avatar
Seasoned Member
 
Joined: Apr 2010
Posts: 310
Likes: 0
From: everett, wa
Year: 2001
Model: Cherokee
Engine: str8 6
Default

Ok im in for sure! I WILL be there and along with 2-3 other xjs and a wrangler. 17th 10am front main lot BAMM!
Reply
Old Mar 12, 2012 | 08:23 AM
  #20  
trans_am7935's Avatar
CF Veteran
 
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Default

man would i like to go, but i leave to go out to sea tomorrow. be back in a month or so, then i will have a couple weeks to have some fun before its back to sea again.
Reply
Old Mar 12, 2012 | 10:57 AM
  #21  
Ellefsonb's Avatar
Seasoned Member
 
Joined: Apr 2010
Posts: 310
Likes: 0
From: everett, wa
Year: 2001
Model: Cherokee
Engine: str8 6
Default

Tell em to buzz off!!!!!! And Your going to walker. Haha
Reply
Old Mar 12, 2012 | 12:20 PM
  #22  
assetts91's Avatar
Thread Starter
CF Veteran
 
Joined: Mar 2011
Posts: 1,842
Likes: 0
From: Woodinville, Bothell and Marysville Washington
Year: 2000
Model: Cherokee
Engine: I6 4.0
Default

I've got some major work to do to my rig before Saturday.... Only day I have available is Friday evening! CRAP

Oil change
Rear main seal
Swap my new currie control arm joints in
Transmission service
Transfer case service
Clean my air filter
Grease all my joints and driveshaft.
Replace front axle u joint.....

Ima be busy....
Reply
Old Mar 12, 2012 | 02:11 PM
  #23  
Ellefsonb's Avatar
Seasoned Member
 
Joined: Apr 2010
Posts: 310
Likes: 0
From: everett, wa
Year: 2001
Model: Cherokee
Engine: str8 6
Default

Where you live! Im in everett maybe i can give ya a hand friday
Reply
Old Mar 12, 2012 | 02:12 PM
  #24  
assetts91's Avatar
Thread Starter
CF Veteran
 
Joined: Mar 2011
Posts: 1,842
Likes: 0
From: Woodinville, Bothell and Marysville Washington
Year: 2000
Model: Cherokee
Engine: I6 4.0
Default

Originally Posted by Ellefsonb
Where you live! Im in everett maybe i can give ya a hand friday
The jeep is at my dads right now in woodinville
Reply
Old Mar 12, 2012 | 03:05 PM
  #25  
Oxen__'s Avatar
Senior Member
 
Joined: Sep 2011
Posts: 972
Likes: 0
From: Burington Washington
Year: 1989
Model: Cherokee
Engine: 4L Renix
Default

Originally Posted by Mopar94
Hey, Im new to Wa and would like to tag along. But not sure the trail requirements. Any info?
I have a 94 XJ with 3" lift setting on 31s. Nothing special but its just starting.
You can do the park on 31'sthe but your giing to do more than drag your diffs. Personaly i wouldn't go to walker on 31s. If you like i can offer a ride along to show you the park. If you think bahh this guys wrong. Drive your own rig in next time. I run pretty much once a week With rossie.

Last edited by Oxen__; Mar 12, 2012 at 03:22 PM.
Reply
Old Mar 12, 2012 | 04:04 PM
  #26  
BuckB91XJ's Avatar
CF Veteran
 
Joined: Nov 2008
Posts: 6,989
Likes: 4
From: Oak Harbor, WA.
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
Default

I'd love to make this trip, guys. I just got the new Cheap Super D30 axle all done this last weekend. I got my Jeep out on the road Sunday night for the test drive. She drove like a dream. I need to test it out on the trail at Walker, now. However, I will be heading to Vegas/Nellis AFB on Saturday the 17th. I will be gone for 2 weeks. It's a dirty job but somebody has to do it...LOL.
Reply
Old Mar 12, 2012 | 04:45 PM
  #27  
assetts91's Avatar
Thread Starter
CF Veteran
 
Joined: Mar 2011
Posts: 1,842
Likes: 0
From: Woodinville, Bothell and Marysville Washington
Year: 2000
Model: Cherokee
Engine: I6 4.0
Default

Originally Posted by Oxen__

You can do the park on 31'sthe but your giing to do more than drag your diffs. Personaly i wouldn't go to walker on 31s. If you like i can offer a ride along to show you the park. If you think bahh this guys wrong. Drive your own rig in next time. I run pretty much once a week With rossie.
I already offered him a ride along but he can ride with you.
Reply
Old Mar 12, 2012 | 05:16 PM
  #28  
Oxen__'s Avatar
Senior Member
 
Joined: Sep 2011
Posts: 972
Likes: 0
From: Burington Washington
Year: 1989
Model: Cherokee
Engine: 4L Renix
Default

Originally Posted by assetts91
I already offered him a ride along but he can ride with you.

oops didnt see that as i was scrolling thru. well i guesse he has options then

i look forward to wheeling with ya again and in my own rig too . snow up there yesterday was pretty sugary and two out of 4 rigs were having trouble . me and rossie wee doing good hope for some fresh powder this next weekend .

hows your rigg coming i saw you had a list of things to do . i my self need to figure out whats clicking in my front drive system for my 4wd , hope its just a u-joint .
Reply
Old Mar 12, 2012 | 06:28 PM
  #29  
assetts91's Avatar
Thread Starter
CF Veteran
 
Joined: Mar 2011
Posts: 1,842
Likes: 0
From: Woodinville, Bothell and Marysville Washington
Year: 2000
Model: Cherokee
Engine: I6 4.0
Default

Originally Posted by Oxen__

oops didnt see that as i was scrolling thru. well i guesse he has options then

i look forward to wheeling with ya again and in my own rig too . snow up there yesterday was pretty sugary and two out of 4 rigs were having trouble . me and rossie wee doing good hope for some fresh powder this next weekend .

hows your rigg coming i saw you had a list of things to do . i my self need to figure out whats clicking in my front drive system for my 4wd , hope its just a u-joint .
Mine is just basic Maintenance. It's been too long for my tranny.... The rear main seal leak just recently turned into a rear main drip lol. I also bought chromoly joints to replace the worn crap ones on my control arms. Gonna be a busy Friday evening
Reply
Old Mar 12, 2012 | 09:55 PM
  #30  
1987XJ's Avatar
Senior Member
 
Joined: Nov 2008
Posts: 510
Likes: 0
From: Oak Harbor, Wa
Year: 1987
Model: Cherokee
Engine: 4.0 Renix
Default

Originally Posted by assetts91

Mine is just basic Maintenance. It's been too long for my tranny.... The rear main seal leak just recently turned into a rear main drip lol. I also bought chromoly joints to replace the worn crap ones on my control arms. Gonna be a busy Friday evening
Man I don't envy having to change the rear main seal. Lol
Reply



All times are GMT -5. The time now is 06:21 PM.