I hear you on that buck its the little things that end up killing a projects budget. Just my fab supplys have killed mine welding wire grinding disks ect doesn't seem like much but adds up very fast

 

Well i took a few nights off not much has got done but im planning to get the comp cut finished tomorrow then get the tank in for mock up and see how much steel is needed for the new floor and tubs. Try and get some pics up tomorrow

 

Mocked up the rear end today just to get a idea

 

Where its sitting in the pics would be 4.5in of lift sitting on the 38s its what im shooting for. All im waiting for is my buddy to finsh his press brake so i can get the floor done

 

Im going to start building my frame that will support the raised floor this weekend soon as i can get the floor in i can move on to the front. Kinda feels like it will never be done lol

 

Just remember, that every little bit gets you closer to the finish. Or something like that.

 

Didn't get as much time to work on this weekend as I wanted I have some other stuff I had to get done. But I got the frame built to raise the floor. The whole floor will be raised just under seven inches From the back of the seat to the gate. I'll get some pictures up tomorrow. I'm going on vacation next week After I get back home I'll have four days to work on it and hopefully I'll be able to pick up some steel for the new floor And tubs.

 

Well didnt take many pictures but got alot done on the floor and tubs. I picked up a 4x8 sheet of 12gauge steel little thick but wanted it strong. The picture im posting is not the final product by any means still have filler pieces to make and have to tie it all together and do more trimming lol dont give me to much hell lol

 

Picked up a 4ft chuck of 2x4 .250 wall for my cross member little over kill but price was right. Hopefully this Saturday ill be done with the truss and the cross member having my friend weld that up im still a little unsure of my abilities to do that lol

 

This ain't no little project!! Keep on doing good work man!

 

Thanks man! And your right its a darn huge project lol

 

need moar!

 

Got a little more done today got my tnt truss welded on! Looks sweet i think

 

Heres what i got done this weekend still needs final welding but worked my butt off with alot of help from my buddy lol
Arms are 2in .250wall. Lower joints are the ruffstuff 1.25 upper heim is there 7/8s.

 

Looking good!