Cuz an 8.8 can't handle 32s without a truss....

 

i got the truss with the kit that i bought the tubes are also welded up this kit was cheaper than the other kits without a truss so i said hell why not get the kit with the truss and im runnin 33's and see you there when ya headin up?

 

I bent my first 8.8 on bfg AT's on 31's. so yes a truss is not overkill.

 

Yeah?

What were you doing when you bent it?

 

May wanna update your sig...

 

I'll be there on Fri, meeting OleBlue and heading up from yakima. Should be there just after noon. Set up camp, get a few trails out of the way and get ready for the busy wild.If they break that easy ill need to start building a truss. The build list just keeps growing!

 

moab on hell's revenge '05

damn that was a long time ago

 

For MOST folks out there a truss is a bit of overkill. Especially with a tire smaller than a 32.

Some may need one, most will be fine without.

 

for you guys with the 8.8 what did u do with the rear brakes i have no brake lines or anything on it so i gotta get new ones any tips or anything?

 

i never woulda done the truss but it came with the kit that i bought

 

go to a auto parts store and tell them you need to make hard brake lines. a quality parts store will get you setup with what you need. its actually pretty simple

 

If you have it already I see no reason not to, but to go out of your way seems lik a waste for a non-hardcore wheeler.

 

But it looks so good!

 

you need two passanger side rubber lines and you need need hardlines and extended rear line from jeep itself.

 

I dont disagree.