Hey fellow XJer's, can anyone tell me what size/type the 4 bolts are for the yoke/transfercase connection? When i bought my 88 XJ it had no front drive shaft and just recently acquired one, unfortunately no yoke bolts. All u joints have been replaced, just need those bolts. Much appreciated.

Sent from my iPhone using CherokeeFM

 

I haven't checked but are the bolts from the rear drive shaft the same? Pull one out and try. If it's the same go to a place that sells bolts and have them match it up.

 

Nevermind. It should have a slip yoke if it's stock. I have a SYE on mine.

Edit: I just crawled under mine to take a look. It's a 2K and I'm not sure what the difference is but now I have a better idea of what your talking about. Sorry I can't be of any help to you. I was thinking the rear would be the same as the front but I forgot I have a SYE and the larger bolts. So much for my idea. Maybe the bolts from the straps that hold the ujoints to the pinion yoke are the same.

 

Great idea, thanks mike I'll check it out...

Sent from my iPhone using CherokeeFM