Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
#361
CF Veteran
Thread Starter
Join Date: Jun 2009
Posts: 5,383
Likes: 0
Received 4 Likes
on
1 Post
Year: 1988 limited
Model: Cherokee
Engine: 4.0 litre
I still not sure if I'm doing this right "ask question thread" and it seems I'm posting a reply,To whom it may concern or etc..my question is can you put a 86 231 in a 96 sport and simply install the electric speedo in place of the cable drive? I realize the ratio may be different.I'm trying to avoid swapping tail housings
#364
Caracticus Potts The Mod
#367
Newbie
Join Date: May 2010
Location: The Big Island, Hawaii
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 L
1999 Jeep Cherokee 4.0 L manifold bolts
How on earth do I get at the lower bolts on the exhaust/intake manifolds? I got them off but I'm having a heck of a time trying to get them back on, especially the back two. Then once I get them on, I have to have enough room to apply a torque wrench. There's got to be a trick to it...
#368
CF Veteran
Join Date: Apr 2008
Location: Lakewood, Colorado
Posts: 1,052
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1990 2dr base
Model: Cherokee
Engine: 4.0L
How on earth do I get at the lower bolts on the exhaust/intake manifolds? I got them off but I'm having a heck of a time trying to get them back on, especially the back two. Then once I get them on, I have to have enough room to apply a torque wrench. There's got to be a trick to it...
Have fun.
#370
Newbie
Join Date: May 2010
Location: Fort Wayne
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 6
Lift
Well I really can't figure out how to post something so I'm doing it this way.
I have a 96 cherokee country. I am installing a budget lift for now but wanting to know if I should get axle shims so I don't get a vibration and if I should install an adjustable track bar so I don't get the death wobble. I drive this truck daily so I want it to still be able to go down the road without all the hassles I have read about. What do I do?
I have a 96 cherokee country. I am installing a budget lift for now but wanting to know if I should get axle shims so I don't get a vibration and if I should install an adjustable track bar so I don't get the death wobble. I drive this truck daily so I want it to still be able to go down the road without all the hassles I have read about. What do I do?
#371
Senior Member
Join Date: Mar 2010
Location: Hampton, Virginia
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: none other
question for ya'll. have a 99 and destroyed my rear quarter panel. darn the luck. anyways will the rear quarters off other years work? want to try my hand at replacing it to see what i can do. that and the rear window behind the door on the other side decided it wanted a tree to come in too. will other years windows work for it too? thanks all.
#372
Member
Join Date: Apr 2010
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Connector Pins
Hi all - I am working some wiring issues to the door and wondered if anyone knew the manufacturer or part number for the pins and connectors used for the speakers and the power windows? I am interested in rerunning the wires in to the connector housings and not having a splice to get into the connector. Thanks for any hints.
#375
they really screwed you over didn't they?
It won't work unless you want to take the transfer case apart and swap input shafts.
Rear quarter panel? do you plan on cutting it out and welding in a new one? because its part of the unibody and can't really be replaced(okay it can, but its stupidly impractical from where I sit) My recommendation for repair would be to get the dents out the best you can and then buy some rear quarter panel armor...there's a reason that at least 3 or 4 different companies make the stuff.
For the window...really any year of the same body style should work.
It won't work unless you want to take the transfer case apart and swap input shafts.
question for ya'll. have a 99 and destroyed my rear quarter panel. darn the luck. anyways will the rear quarters off other years work? want to try my hand at replacing it to see what i can do. that and the rear window behind the door on the other side decided it wanted a tree to come in too. will other years windows work for it too? thanks all.
For the window...really any year of the same body style should work.