Hey guys, I'm really on the last breath before insanity will completely take its grasp on me. I've searched all fora for hours to no expense..
As many my European XJ 1996 did not come with the original key fobs, so I decided to solder in an aftermarket keyless entry system. After thouroughly reading different posts I cut out the wires to the RKE module in the overhead console and successfully installed the new RF RKE. But.
Now the gauge cluster does not work. I have been trying to figure out what wires do what, but I can only conclude that there are several functions to wires due to relays. So back to stock, but one problem: I have no idea how the wires were connected to the RKE connector. before I started fumbling with it. I have tried several possibilties, but I dare not continue and fry the whole module,

Could anyone with an XJ please take a picture of the wires in the connector connecting to the original module? I have several wiring diagrams, all missing a or some wires that should be in the connector..

My connector was connected to 7 wires:
Pink
Black
Yellow
White/Black
Orange/Violet
Pink/Violet
Blue/orange

Many thanks...

 

I found this info here:------------------------------------------------------------