Won't start.
Thread Starter
Newbie
Joined: Aug 2010
Posts: 29
Likes: 0
From: Licking Missouri
Year: 1988
Model: Cherokee
Engine: 4.0
I have a 1988 Cherokee with the 4.0 6 cylinder. I left it alone for a few days and went and tryed to start it and it did, then I went to drive it the next day and all it does is turn over. I have changed the plugs, plug wires, distributor cap, rottor button, and fuel filter. I have had the coil tested and it was good. I have been told by a few people that it is the crank position sensor. Any and all input will be appreciated.
"CF Moderator"
Joined: Sep 2008
Posts: 3,045
Likes: 3
From: N.J. Shore Area
Year: 1994
Model: Cherokee
Engine: l6 HO
I have a 1988 Cherokee with the 4.0 6 cylinder. I left it alone for a few days and went and tryed to start it and it did, then I went to drive it the next day and all it does is turn over. I have changed the plugs, plug wires, distributor cap, rottor button, and fuel filter. I have had the coil tested and it was good. I have been told by a few people that it is the crank position sensor. Any and all input will be appreciated.
Thread Starter
Newbie
Joined: Aug 2010
Posts: 29
Likes: 0
From: Licking Missouri
Year: 1988
Model: Cherokee
Engine: 4.0
Is there supposed to be a connector thra plugs into the coil? Because the only thing plugged into the coil is the plug wire that goes to the distributor.
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Thread
Thread Starter
Forum
Replies
Last Post
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Oct 6, 2015 08:09 PM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 29, 2015 08:43 PM
Endlessknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 26, 2015 03:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



