bada$$91xj

well i got a 94 xj sport 4.0 4x4 and was wondering why i only have one wiper speed checked power at motor it was all good that route does this mean maybe the wiper lever thing on the steering wheel is broken or a faulty motor.Also sorry the speed i have is very frickin slow

bada$$91xj

from all the searching i've done here the part that keeps coming up is the wiper delay module is this part located on the kickplate or steering column. also to test this can i plug the 2 connectors together check for low and as for pulling it apart and looking for burnt spots or corrosion correct.

Bmoney

look under the dash below the steering column for the wiper control module.
it should be on the edge of the lower trim held on by Velcro.

MonacaYankee

My 94 also had your symptom. I replaced the wiper module behind the lower dash trim with one from a 96. Now I have intermittent, slowest, and slow speeds, haha.

redmuck

kickazz rig you got there. also good luck finding a new wiper intermittent mod. i ended up getting like 6 or so from the junk yard and only 2 worked, one was for redmuck 1 which was a 91, and now my 93, redmuck 2.0, has the other working one.

redmuck

hey Monaca, hows Georgia? looks like you have redmucks cousin.

steelybill

Hard to believe that a great vehicle like a Jeep, has such crappy wipers !! Slower than molasses in January !! I even thought about a retro-fit of some kind !

bada$$91xj

well i'm thinking about doing the grand cherokee wiper module heard their a lil bit better but does any one no if this is a direct fit swap like electrical connector wise.
Oh yeah and redmuck this profile picture is off my old rig just wait getting ready to put up the new ones

freegdr

Direct fit..

bada$$91xj

thanks freegdr i know what i'm doing now.

RocketMouse

^^^lol... welcome to the show...titled "Jeep".

I've come to realise that there are several things on these puppies that make you go "what the hell" were they thinking?..... but overall they troop right along like the little tanks they are.

One that gets me every time is the almost completely unprotected ECU. And the placement right at the edge of where the hood closes... pretty easy to get moisture right onto it if not careful. Seems goofy to me. I'm tinkering with different ideas to waterproof it.

steelybill

Water proofing it sounds like a good idea !! Maybe you could post some pics of how you do it, if you get around to it !!

bada$$91xj

heck yeah let me see your water proofing ideas i've been think about 3m super bond silicone for that.

MonacaYankee

It's alright.. . I just need to put flares back on it, they were missing when I bought it.

bada$$91xj

so update on the wipers pulled the wiper module look fine no burn spots the 5.5 amp fuse is good i'm beginning to wonder if its not the wiper/turn signal lever its self