OK guys my worst nightmare has come true. I need to replace one of the switches in the steering column. I've lost all washer operation and I've lost the int. function of my wipers.
I ripped the switch and full wiring harness all the way down to the connector under the dash out of a donor XJ in the local scrap yard. When I say ripped, I mean I destroyed that steering column getting the switch out though, I was very careful that I got the switch out fully intact.
Now, I need to gently and correctly take the clomn apart in my XJ to replace this switch. How do I do it? Does the steering wheel have to be pulled? or is there some way to get the column cover off that I am just not seeing? My XJ is a 91 if that makes a difference. HELP PLEASE!!

 

from exp, i know taking the wheel off always helps, it gives you that much more room

 

Will a regular old crows foot puller work for pulling the XJ steering wheel. Mine is old skool. No air bag or fancy steering wheel to deal with.

 

If you PM me I can send you a service manual diagram of a 1994 which should be the same...Tj

 

Thanks TJ, I really appreciate the help. I have the PM coming your way. Thanks again, Brian.

 

I need to replace my wiper switch on my 93 xj. No tilt no intermitent. Just a base mofel. How do i get this switch out. I got it all ripped apart but have no clue how to get it out. And i cant find any threads to help me out.

 

This is a job I need to do soon but I hope to upgrade to intermittent wipers

 

i am putting an entire harness (engine and body) out of a 95 cherokee into my 89 wrangler does anybody have any wiring diagrams that are really explicit,i cant find anything on the internet PLEASE HELP

 

I need help getting mine out as well, my switch stick broke and I need to replace it bc it tore off all the wiper grounds and positives