Who drills thermostats, which drill bit?
10-21-2012, 09:43 PM
#1
Banned
Thread Starter
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Who drills thermostats, which drill bit?
I replaced thermostat and noticed that old one had small air-passing valve, but new one didn't.
Is that a good idea to drill small hole?
Is that a good idea to drill small hole?
10-21-2012, 09:59 PM
#3
CF Veteran
Join Date: Nov 2009
Location: The Republic of TEXAS
Posts: 8,172
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L HO
Check the new stat for a air bleed "notch" (yellow circle). Place the notch at the 12 o'clock position like u would a stat with a jiggle valve. If the stat has the notch or jiggle valve, call it good.
Last edited by djb383; 10-21-2012 at 10:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jooman07
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-21-2015 12:13 PM
Soilman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 07:51 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
