Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Where is the track width measured from???

Old 02-02-2008, 09:46 PM
  #1  
Junior Member
Thread Starter
 
atomicjoe23's Avatar
 
Join Date: Jan 2008
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Where is the track width measured from???

I want to build a JeepSpeed/CORR/Desert Racing inspired Jeep Cherokee and I need to figure out where the factory measurements for track width come from so that I can figure out what size fiberglass flared front fenders to get (6" or 8") and so that I can match the front and rear track widths.

Does the factory measurement of 56" come from measuring from hub face to hub face (I'm assuming that's a good place. . .would be right about the center of a tires section width if the wheel doesn't have custom back spacing right?)? If not, does anyone know where the reference measurement point is from?

Along with this. . .how much width would be added to the track width from the hub face (if that is where the reference point is for track width) for a 35x12.50 tire mounted on a 10" wide wheel on the vehicle.

Thanks guys. . .I'm new to the off-roading scene so I appreciate all your help/responses!
Old 02-02-2008, 10:15 PM
  #2  
CF Veteran
 
ktmracer419's Avatar
 
Join Date: Sep 2007
Posts: 4,869
Likes: 0
Received 14 Likes on 10 Posts
Default

depends on the tire and backspacing of the wheel.

stock xj axles are around 59" from wms to wms (wheel mounting surface)

and if you plan on a jumping that, i highly reccomend at least trussing the front dana30 and swapping in a stronger trussed rear as well as all necessary body stengthening.
Old 02-03-2008, 12:45 AM
  #3  
Junior Member
Thread Starter
 
atomicjoe23's Avatar
 
Join Date: Jan 2008
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Does anyone know what the FACTORY spec is for the track width of an XJ Cherokee?

I've seen 3 different lengths now. . .found 56" on two websites, 58" on one website and now I see 59" listed here. . .now I know that they are all pretty close, but I would really like to know what the factory lists and where they measure from.

Thanks again guys!
Old 02-03-2008, 02:35 PM
  #4  
CF Veteran
 
ktmracer419's Avatar
 
Join Date: Sep 2007
Posts: 4,869
Likes: 0
Received 14 Likes on 10 Posts
Default

Dimensions

(small differences may occur depending on optional equipment or trim level)

wheelbase = 101.4"
overall length = 165.3" - 168.8"
overall width = 67.9" - 70.5"
track = 58"
height = 64"
height with roof rack = 66.8"
ground clearance (from differentials) = 7.3" - 8.3"
approach angle = 37.6* - 38*
departure angle = 31* - 32.1*
breakover angle = 21* - 21.9*
curb weight 2wd = 2,891 lbs - 2,993 lbs
curb weight 4wd = 3,057 lbs - 3,386 lbs
cargo capacity = 71.0 cu ft.
taken from:

http://www.jeepforum.com/forum/showthread.php?t=26256
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SteveMongr
Cherokee Chat
6
10-22-2015 10:05 PM
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 09:52 PM
Stabsthedrama
Cherokee Chat
8
10-01-2015 06:34 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: Where is the track width measured from???



All times are GMT -5. The time now is 11:56 PM.