Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   where can i buy this part (https://www.cherokeeforum.com/f2/where-can-i-buy-part-8472/)

xer0 01-03-2009 02:24 PM

where can i buy this part
 
i am trying to find the switch on my 231 tc that indicates if 4wd is or is not engaged

Howler_GT 01-03-2009 04:34 PM


Originally Posted by xer0 (Post 99784)
i am trying to find the switch on my 231 tc that indicates if 4wd is or is not engaged


Ahh the infamous "4WD Indicator Light Switch"

First let me tell you this: Most places have the TC switch.... this is not the one you need. It is ALMOST identical but the innards are too short. The interior contact for the transfer case will NEVER get close enough to make contact with the switch.

I have only found TWO places (other than JY):

1. NAPA But only use this one if absolutely necessary as they want over $50 for the little thing.

2. RockAuto.com.
Here's a link to the 1994 unit.
By clicking the "MORE INFO" will pull up pics of them

http://www.rockauto.com/catalog/x,ca...parttype,10775

These are the ONLY two that I have found.

Personally, I use RockAuto ALOT. Fast shipping and they accept PayPal too.

xer0 01-03-2009 05:06 PM

will that fit a 2000 or is there a diffrent one

edit:

this the one i want for a 2000

http://www.rockauto.com/catalog/x,ca...parttype,10775

Howler_GT 01-03-2009 06:40 PM

My bad, I have the 94 link saved.

Might want to pull your unit out and double-check the thread length.

Seems awful short. Looks more like the TC switch length

xer0 01-03-2009 07:29 PM

do these things fail just because the ball gets dirty and cant make a good connection between the pins on the other side?

because isn't this just a floating ball that slides up to close the connection/switch by connecting the two pins

Howler_GT 01-04-2009 09:33 AM

Ya never know.
Might just be an easy resurrection.
Remove unit, spray living daylights with electrical contact cleaner, re-install.

Why not give it a try and let us know what happens, might be able to save $30-$40

xer0 01-04-2009 06:47 PM

that was what i was going to do today while i was under the jeep lol

xer0 01-05-2009 07:48 PM

i tryed to get at the switch but couldn't get it. does any oen kno the size wrench i need ot use, or a trick. all i can think of is to unbolt the cross member and lower the tranny and tc. any other ideas


All times are GMT -5. The time now is 11:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands