Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

wheel bearing ???

Old Jan 3, 2011 | 08:39 PM
  #1  
CarolinaBoy's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 92
Likes: 0
From: Dallas,NC
Year: 1990
Model: Cherokee
Engine: 4.0
Default wheel bearing ???

On my way home today I noticed my front left tire wobbling a little bit so I pulled over and torqued down all the lugs start back home and it just kept gettin worse made it home jacked the tire up and picked up on the tire and there was a good inch of movement so my guess is its the wheel bearing anybody know what else it could be ?
Reply
Old Jan 3, 2011 | 08:43 PM
  #2  
mr-warwagon's Avatar
Member
 
Joined: Jan 2011
Posts: 225
Likes: 0
From: Stationed at Ft Campbell from SW Flordia
Year: 99XJsport
Model: Cherokee
Engine: 4.0L
Default

its a hub bearing seald unit pretty easy to change
Reply
Old Jan 3, 2011 | 08:43 PM
  #3  
mr-warwagon's Avatar
Member
 
Joined: Jan 2011
Posts: 225
Likes: 0
From: Stationed at Ft Campbell from SW Flordia
Year: 99XJsport
Model: Cherokee
Engine: 4.0L
Default

its a hub bearing sealed unit pretty easy to change
Reply
Old Jan 3, 2011 | 08:51 PM
  #4  
CarolinaBoy's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 92
Likes: 0
From: Dallas,NC
Year: 1990
Model: Cherokee
Engine: 4.0
Default

Thanks for the quick response I just wanted someone else input on what it could be ohh yea and a little off topic but how do I get my picture under my name I haven't figured out why it isn't there
Reply
Old Jan 3, 2011 | 09:36 PM
  #5  
jeepkid46's Avatar
Seasoned Member
 
Joined: Dec 2010
Posts: 343
Likes: 0
From: Payson, UT
Year: 1994
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by CarolinaBoy
Thanks for the quick response I just wanted someone else input on what it could be ohh yea and a little off topic but how do I get my picture under my name I haven't figured out why it isn't there
Could be ball joints or wheel bearings
Reply
Old Jan 3, 2011 | 09:45 PM
  #6  
Bustedknuckle's Avatar
Old Skewl CF like a Sir
 
Joined: Feb 2008
Posts: 4,355
Likes: 3
From: Fort Myers, FL
Year: 1996
Model: Cherokee
Engine: 4.0L High Output OBDII
Default

Originally Posted by CarolinaBoy
Thanks for the quick response I just wanted someone else input on what it could be ohh yea and a little off topic but how do I get my picture under my name I haven't figured out why it isn't there
You have to be special.
Reply
Old Jan 3, 2011 | 09:50 PM
  #7  
Rikkadog's Avatar
Member
 
Joined: Sep 2010
Posts: 171
Likes: 0
From: Spotsylvania VA
Year: 1992
Model: Cherokee
Engine: 4.0
Default

If it's just up and down movement it's ball joints.
Reply
Old Jan 3, 2011 | 09:57 PM
  #8  
96_xj's Avatar
Honorary Moderator
 
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
Default

You need to really examine not just listen to us, it will save you money too. It could be wheel bearings or ball joints like listed before. Ball joints require a ball joint press and some patience, wheel bearings require some patience but no special tools. Both of which you need to tear your front end apart for.

while you are in there. u-joints are cheap and look to see if they need replaced.
Reply
Old Jan 3, 2011 | 10:00 PM
  #9  
brutalxj's Avatar
CF Veteran
 
Joined: Jan 2010
Posts: 1,506
Likes: 2
From: WI
Year: '99
Model: Cherokee
Engine: 4.o
Default

Have someone else move the tire and you look at what is moving. If its the upper or lower part of the C its the ball joint. If its in the center its the wheel baring witch is a hub assembly unfortunately. Can't pull them out and re pack them you have to buy the new assembly. Kinda sucks in that aspect. But not hard to do.
Reply
Old Jan 3, 2011 | 10:04 PM
  #10  
96_xj's Avatar
Honorary Moderator
 
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
Default

And they are sealed assembly(1 piece) they should never look like this when you pull them out lol:

Reply
Old Jan 3, 2011 | 10:09 PM
  #11  
xj guy's Avatar
Senior Member
 
Joined: Jan 2011
Posts: 730
Likes: 2
From: Joliet, Il
Year: 1996
Model: Cherokee
Engine: HO4.0 I6
Default

Originally Posted by CarolinaBoy
Thanks for the quick response I just wanted someone else input on what it could be ohh yea and a little off topic but how do I get my picture under my name I haven't figured out why it isn't there
You have to set your avatar pic. Found this one out the hard way lol
Reply
Old Jan 4, 2011 | 12:50 PM
  #12  
CarolinaBoy's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 92
Likes: 0
From: Dallas,NC
Year: 1990
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Rikkadog
If it's just up and down movement it's ball joints.
Its not just up and down its side to side too
Reply
Old Jan 4, 2011 | 01:09 PM
  #13  
jcwclm's Avatar
CF Veteran
 
Joined: Sep 2010
Posts: 2,844
Likes: 0
From: Warsaw, IN
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by CarolinaBoy
Its not just up and down its side to side too
Not your bj's.....ha....wheel bearing most likely!
Reply
Old Jan 4, 2011 | 01:29 PM
  #14  
CarolinaBoy's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 92
Likes: 0
From: Dallas,NC
Year: 1990
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Bustedknuckle
You have to be special.
Well how else was i supposed to figure it out smart *****
Reply
Old Jan 4, 2011 | 01:49 PM
  #15  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

Originally Posted by CarolinaBoy
Well how else was i supposed to figure it out smart *****
start pushing buttons

Last edited by freegdr; Jan 4, 2011 at 01:51 PM.
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:08 AM.