nicksan

Im looking to pickup All the bolts, nuts and Ubolts I need for a leaf spring

install so I can replace everything but I guess there are different Ubolts

for different rear ends of the same year?

I see a 3.55 chrysler 8.25 and another one that says 3.18 for the same

years? I have a stock 1995 XJ, 2 wheel drive, anyone know what Ubolts I

need?

Thanks

salad

There's a U bolt for the 2.75" diameter Dana 35 and one for the 3.0" diameter Chrysler 8.25". Which axle do you have?

nicksan

I dont know what I have. Just a stock 95 rear end. I tried to check a plate that from what I have read

is on the diff but it is not there/missing?. Is there anywhere else I might find

the info?

Thanks.

SG Mason

Measure the axle housing, if it is 2.75" it is a D35, if it is 3" it is a Chrysler 8.25. There is a picture with a bunch of dif covers that can be used to ID the axles too, but I can't find it right now

nicksan

I found a few different charts online.

Ill check it out, Thanks guys.

http://www.differentials.com/technic...identification

http://www.jeep4x4center.com/jeep-ax...tion-chart.htm

I also found the link to the Axle Info sticky a few links above.... LMAO......

https://www.cherokeeforum.com/f2/axle-info-148057/

caged

if you have abs, you will have the d35. if not, it will be the 8.25