violent jerk, bucking , shaking Read this
 

Hello, I have just bought a jeep cherokee from an Army buddy of mine!! Its a 1996 manuel! It has a bad problem..It shakes and bucks when starting out in first , and second gear somtimes third if i shift to early into third but problem goes away in first and second gear once the rpms get above 3,000..... My buddy Drove it from Iowa to GA with 3 broken motor mounts.. He did have them replaced.... It also has a hard time getting into reverse...
I am going to change all of the fluids in the transmisson and diffs but i know thats probally not the problem.

Hope someone can help out thanks a bunch!!! Moose...

Posting the exact same question with a different title does not make the answers come faster. Especially when the threads are only 30 minutes apart.

hahahaha

Winston done http://i289.photobucket.com/albums/l.../B_slapped.gif ya...

is it lifted? geared? how big are the tires? just stop short shifting it....................

I did not intend to be rude or poke fun at the person asking the question. Simply stating that impatience does get an answer. Sometimes you have to wait for the person with the knowledge of how to provide a solution to the problem. It may take a little time to get the info you need.

True, but it's good clean fun to pick on newbs today.

MOOSE... no harm meant. :cheers:

replace the clutch and throwout bearing... AND have the flywheel turned or it is money wasted..

good luck

And.......... we've lost him. Less than an hour after posting both threads and he disappears in the night like a :shuriken: without even replying to either thread.

Its not lifted.. My bad i know not to post same question twice---moose

We are just picking on you a little. We really do try to help but lately the forum has been flooded with useless repeated questions.


I would second the suggestion of replacing the clutch and having the flywheel resurfaced as it may be warped. Also make sure you get the motor mounts and transmission mount replaced. If all 3 are broken the twisting of the drivetrain created by the torque of acceleration may have also bent some of the linkages.

Okay

thank u i was kinda thinking same thing!! I just got the jeep today and i am excited cant wait to work on it.. i wont post stuff no more twice appricate the advise---moose

Yeah, were just playin MOOSE. I would first check those codes you have stored.

alright will do...