vacuum line issue
05-04-2011, 07:00 PM
#1
Seasoned Member
Thread Starter
Join Date: Feb 2011
Location: jackson nj
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
vacuum line issue
i know my 4wd has been giving issues so b4 i took it around the block somehow got it to engage by hiting the gas hard then i got out to the trails make it through everything in the frist 5 or 6 miles of trails then after a short trip down the road hit the trails again and start bogging down in simliar obsticals i know my front drive shaft is spinning so that leaves the vacuum system right i tryed cleaning the rubber pice that conects to the axel i got no idea what could be up with the vacuum lines also my 4wd light goes on
05-04-2011, 07:04 PM
#2
CF Veteran
Join Date: Feb 2011
Location: Bergen County, New Jersey U.S.A.
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
check your linkage bushing also clean the mud and dirt out of the linkage it self...
05-04-2011, 07:07 PM
#4
CF Veteran
Join Date: Feb 2011
Location: Bergen County, New Jersey U.S.A.
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
05-04-2011, 07:14 PM
#5
Seasoned Member
Thread Starter
Join Date: Feb 2011
Location: jackson nj
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
they give me something to go by it seems like at one point one line (i cant rember witch)looks like po had attempeted to repair with a small pice of rubber tube and a small clamps near the end of the line
Thread
Thread Starter
Forum
Replies
Last Post
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-26-2020 12:59 PM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
09-08-2015 06:28 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)